Congratulations on your new TTL Setup! Here are detailed instructions on how to completely set up your Pro-Ject: T2 Super Phono / KEF LSX II / Turntable Package.
1.0 SET UP YOUR KEF SPEAKERS
1.1
- Place the unit marked on the back with 'PRIMARY' (it has more inputs on the back) on the RIGHT.
- Plug in the power cables for both units.
- Download the KEF app, create an account, and follow setup prompts.
2.0 SET UP YOUR T2 SUPER PHONO TURNTABLE
2.1
- For turntable setup, please refer to this Pro-Ject Visual Guide.
3.0 CONNECT YOUR TURNTABLE + PLAY A RECORD
3.1
- Locate the Audioquest Box and use the enclosed cable to connect the turntable to the AUX input of the primary KEF speaker.
- IMPORTANT: when you plug in your turntable, make sure that the button next to the turntable outputs is PRESSED IN. This activates the built-in preamp and allows you to plug into an AUX input.
- If you are using an external preamp, deactivate the preamp (phono out) and use the clear cable that came with the turntable. Attach the U-shaped ground wire to the binding post.
3.2
- Remove the STYLUS GUARD from the turntable cartridge / needle.
- Using the power switch on the left side of the turntable, turn on the motor.
- You can use the tonearm lift (the small level at the base of the tonearm) to gently lower the needle onto the record.
3.3
- On the KEF app, select the remote button (on the bottom, to the right of the home button).
- Select AUX.
- You should now hear the turntable.
- Control the volume using the app or remote control.
- You can also select the AUX input / control volume on the remote control (cycle through inputs by pressing the < + > buttons)
- Enjoy your TTL Setup!
- If you have further issues or questions, please contact us at customerservice@turntablelab.com
