Vestax

Official Vestax replacement stylus for Handy Trax portable turntables. Intended for 33/45 RPM usage and works only with Handy Trax models.

• 33/45 RPM replacement stylus
• works only with Handy Trax

Official Vestax replacement fader for DSM-360 and DSM-410 mixers.

Replacement power supply for Vestax mixers. Fits the following mixers:

• PMC-08PRO
• PMC-500
• PMC-CX

New crossfader from Vestax, featuring controls for fine tuning the cut-in time for both sides of the fader. There are two knobs on the main body of the fader (which you will have to take off your faceplate to access), and by adjusting these to the shortest possible cut-in time your fader will essentially be completely on or completely off with the smallest movement. This should completely eliminate any "lag" time on the crossfader, and obviously make your cuts as sharp as possible. The fader otherwise works + feels just like the rugged PCV fader Vestax has used for years. Quite an improvement.  Compatible with the following mixers:

• Vestax PMC-05Pro-2
• Vestax PMC-05Pro-3
• Vestax PMC-05ProSL
• Vestax PMC-06Pro
• Vestax PMC-06Pro-A
• Vestax PMC-07Pro
• Vestax PMC-07Pro-ISP

NOTE: Your mixer must have a "G" in front of the serial number to be compatible.

LAB POINTS

• works as a replacement fader for PMC-05ProIV or upgrade for VCI-300MKII
• non contact fader uses 4 magnetic sensors to detect movement
• smooth movement with minimum friction
• includes anti-bounce plate for stable performance

REVIEW

Vestax's CF-X2 is a replacement fader for the PMC-05ProIV or an optional digital crossfader upgrade for the VCI-300MKII. The CF-X2 delivers improved performance with a razor sharp cut-in point (no "cut lag") for DJs that want to flex advanced scratch techniques. Note: Vestax recommends running the VCI-300MKII with the SDC-7 power supply when using this fader as it takes power out of the unit if running off USB. Also the CF-X2 firmware is required to optimize curve control and cut lag control features.

COMES WITH

• anti-bounce plate
• screws
• bracket
• connector cable

Official Vestax replacement crossfader for DSM-420 mixers.

LAB POINTS

• portable turntable with USB connectivity
• built-in speaker
• plays 33, 45 and 78 RPM (78 stylus not included)
• pitch control & tone control
• RCA out + 3.5mm headphone out
• includes cartridge and protective cover

LAB REVIEW

The Handy Trax is a well thought-out machine, designed with input from collectors and djs. As a result, it is easy to use, surprisingly durable, and has a host of sensible features. For most, the top feature will be the powerful, full sounding stereo headphone output. It's plenty loud enough and sound quality will not have you second guessing what the record "really sounds like." Headphones get an A+. You can also plug the Handy Trax into your receiver or stereo system with its standard RCA outs, so it's possible to double as a home unit. Listening on the built-in speaker is definitely a last resort, but even that is good enough to fill up a small space like a bedroom. Other functions include a strong pitch control knob and effective tone control (just low/high, but it's enough to remove scratchy hiss). The Handy Trax also features a 3.5mm input which allows you to play another source through the turntable's speaker. It is powered either by an included, detachable power plug or six "D" batteries. This upgraded model also features USB connectivity so you can rip vinyl direct to your computer.

KEY FEATURES

• USB connectivity
• built-in speaker
• runs on 6 "C" batteries or included AC adapter
• dimensions: 14.25" x 10.5" x 3.75"
• weight: 4 lbs.

COMES WITH

• cartridge
• protective cover

LAB POINTS

• portable turntable with USB connectivity
• built-in speaker
• plays 33, 45 and 78 RPM (78 stylus not included)
• pitch control & tone control
• RCA out + 3.5mm headphone out
• includes cartridge and protective cover

LAB REVIEW

The Handy Trax is a well thought-out machine, designed with input from collectors and djs. As a result, it is easy to use, surprisingly durable, and has a host of sensible features. For most, the top feature will be the powerful, full sounding stereo headphone output. It's plenty loud enough and sound quality will not have you second guessing what the record "really sounds like." Headphones get an A+. You can also plug the Handy Trax into your receiver or stereo system with its standard RCA outs, so it's possible to double as a home unit. Listening on the built-in speaker is definitely a last resort, but even that is good enough to fill up a small space like a bedroom. Other functions include a strong pitch control knob and effective tone control (just low/high, but it's enough to remove scratchy hiss). The Handy Trax also features a 3.5mm input which allows you to play another source through the turntable's speaker. It is powered either by an included, detachable power plug or six "D" batteries. This upgraded model also features USB connectivity so you can rip vinyl direct to your computer.

KEY FEATURES

• USB connectivity
• built-in speaker
• runs on 6 "C" batteries or included AC adapter
• dimensions: 14.25" x 10.5" x 3.75"
• weight: 4 lbs.

COMES WITH

• cartridge
• protective cover

Fits most turntables with tonearms that accept screw-in headshells. This includes all Vestax models, plus Technics SL-1200 models and turntables by Stanton, Numark, etc.

B-STOCK SPECIAL: This is a refurbished unit with a repaired ground nut connection, but has been tested and is in good working condition. See detail pics for close-up off actual mixer. Comes with original power supply and box (opened with some wear and tear).

OVERVIEW

Vestax's 06-Pro is a proven 2-channel mixer with a slim profile and high quality VCA crossfader and components. The 06-Pro has been a Vestax bestseller for over 10 years because of its price, profile, and straight-forwardness.

FEATURES

The 06-Pro is a basic 2-channel (2 phono + 2 line inputs) mixer designed with the active DJ in mind (scratch + mixing). It features a very slim design (designed by Shortkut of ISP) to bring the distance between your tables to a minimum. This is especially helpful for trick mixing and juggling. It features a replaceable CF-PCV crossfader with curve control, which is the same high quality fader used in higher priced models. It was also the first mixer to introduce the innovative "hamster switch" that allows you to reverse the channel inputs to suit your scratch preference. Basic features include a 2-band EQ as well as gain and pan on each channel as well as replaceable volume faders and multi-directional input (transformer) switch. There is no mic input.

OUR OPINION

If you're looking to purchase a quality dj mixer on a budget, you can't get much better than the 06 in terms of reliability and value. The lack of a mic channel and mid-channel EQ would be the only minuses, but its over quality, unique design and clean layout more than make up for those.

KEY FEATURES

• 2 channel scratch mixer
• 2 line + 2 phono inputs
• crossfader w/ curve adjustment
• slim design to bring the distance between your tables to a minimum
• hamster switch
• 2 band EQ
• multi-directional transformer switch

Official Vestax power supply for VCI-400, VCI-300 MKII and VCI-100MKII. Using an external power supply offers a master volume boost.

Please note: For the VCI-300 and VCI-100, this works with MKII versions only.

Official Vestax replacement crossfader for Vestax VCI-100 & VCI-300. Works with both MKI and MKII models.

KEY FEATURES

• fits both VCI-100 & VCI-300

Replacement fader knob for all Vestax crossfaders. 

LAB POINTS

• everything you need to dj (with a laptop) in a compact, all-in-one unit
• now works with Serato Intro (downloadable for free)
• multichannel audio system
• master out, monitor, and mic input
• no need for separate audio interface!
• hi-resolution, touch sensitive jog wheels for an analog feel
• onboard EQ, looping, effects, and cue-point control
• high quality faders
• pitch control and instant beat matching
• connects and is powered via USB
• includes Virtual DJ LE

MANUFACTURER'S REVIEW

Typhoon is an all-in-one bundle of digital DJ hardware and software, offering total control to mix, scratch, and play music as a DJ would right at your fingertips. The included software transforms your computer into a full-blown DJ system. Whether for the beginner or seasoned pros alike, plug Typhoon into your computer and you become a DJ.

MULTI CHANNEL AUDIO SYSTEM

For high quality monitoring, master output and separate microphone input.

TOUCH SENSOR JOG WHEEL

Touch sensor jog wheel platters give high resolution to experience an analog feel when scratching and mixing.

EQ SECTION

Easily boost and cut HI, MID & LOW with each frequency knob.

TEMPO CONTROL

Instant beat matching with the sync button and precise adjustment with the speed sliders.

LOOP SECTION

Speedy length setting with the +/- buttons and start a loop at any timing.

SONGLIST

Displays all your tracks with one click.

CURSOR

Move up and down through your song list, push each LOAD button (Left for left deck, right for right deck) to load a song.

EFFECT SECTION

You can instantly add effects to tracks whenever you like and easily adjust the parameters.

FILTER

One push and the jog wheels turn into filter control.

MONITORING

Prepare your next track with clear audio through your headphones by pushing each decks monitor button.

Also features PLAY SECTION that starts & stops songs, CUE/CUP for instant cure point settings, and rugged polycarbonate top panel.

TYPHOON FEATURES

• everything you need to dj (with a laptop) in a compact, all-in-one unit
• multichannel audio system
• master out, monitor, and mic input
• no need for separate audio interface
• hi-resolution, touch sensitive jog wheels for analog feel
• onboard EQ, looping, effects, and cue-point control
• high quality faders
• pitch control and instant beat matching
• connects and is powered via USB
• Dimensions : 14"(W) x 9.5"(H) x 1.5"(D)
• Weight : 1.5kg
• Power Voltage : 5V 500mA
• Power : USB power

VIRTUAL DJ LE FEATURES

• Dual Players with Controls and Pitch
• Internal Mixer with Gain and Equalizers
• Key Lock/Master Tempo
• Instant BPM Detection
• Automatic Beatmatch
• Automatic Gain
• Smart LOOPS

COMES WITH

• USB cable
• CD-ROM (Virtual DJ LE)
• CD-ROM (driver)

Price Drop! The VCI-380 is now $699 (previously $899) for a savings of $200.

LAB POINTS

• high-end 2 channel DJ controller designed for Serato ITCH + now compatible with Serato DJ
• LAB EXCLUSIVO: all orders include FREE high-performance Oyaide Class B USB Cables from Japan (a 29.95 value! ships separately, online purchases only)
• built-in stand alone mixer with trim, EQ and Hi-Pass filter on each channel
• signature Vestax high-resolution JOG wheels (platters) are highly responsive to touch and can be adjusted to user's touch preference
• LED needle point embedded in the jog wheel provides excellent visual monitoring
• (2) pad control sections to control loops and samples with creative Performance Modes such as Slicer, Roll, Sampler, Loop, Hot Cue and Pad FX
• touch sensitive ribbon control on each deck alters the parameters of Pad FX, swipes, holds and needle drops tracks
• low latency, high-resolution 24bit / 48kHz soundcard for top sound quality
• XLR main outputs for optimal sound quality, RCA booth out
• crossfader with curve control, upgradable to CF-X2 fader

LAB REVIEW

The VCI-380 is a robust 2 channel DJ controller from Vestax, specifically designed for use with Serato ITCH or Serato DJ (downloadable). As an upgrade from their previous ITCH controller (the VCI-300), the VCI-380 adds a wealth of new and improved features including touch/velocity sensitive pads for control loops and samples, touch sensitive ribbon strips, high end adjustable jog wheels with embedded LED needle points, and stand alone mixer capabilities for mixing with turntables, CD-Js, or other media players. All this in a sturdy (mostly metal construction), compact unit that can endure the rigors of gigging on the road.

In addition, advanced software and FX control features are embedded into the VCI-380's layout. Use the pads to control creative Performance Modes such as Slicer, Roll, Sampler, Loop, Hot Cue and Pad FX, or use the ribbon controllers to alter the parameters of Pad FX, swipes, holds and needle drops tracks. The filter FX knob doubles as a Hi-Pass filter when using the unit as a stand alone mixer, and enjoy the convenience of top quality sound at all times via low latency, high-resolution 24bit / 48kHz soundcard and XLR outs. Vestax also includes dual mic inputs with volume control, RCA booth out, and faders with curve control to create a truly well-rounded, versatile unit.

Vestax VCI-380 vs. Vestax VCI-400

• 2 channel controller vs. 4 channel controller
• VCI-380 is bundled with Serato Itch and compatible with Serato DJ (downloadable), VCI-400 is bundled with Virtual DJ LE 4 Decks (but can be mapped to any software)
• VCI-380 functions as a stand alone mixer right out of the box, VCI-400 requires a software update to act as a standalone mixer
• VCI-380 features a ribbon controller, VCI-400 does not
• VCI-380 features a Booth Out, VCI-400 does not
• VCI-380 features XLR out, VCI-400 features XLR and 1/4" out

KEY FEATURES

• Mic input (1x XLR, 1x 1/4") x 2
• Line input (RCA Stereo) x 2
• Master Output XLR x 2
• Headphone output (1/4" / 1/8") x 2)
• Crossfader curve control x 1
• USB 2.0 port (BUS power not supported)
• POWER DC 7.5V / 1000mA (SDC-7 Power adaptor included)
• DIMENSIONS 16.8" x 12" x 2.5"
• WEIGHT 7.7 lbs.

COMES WITH

• USB Cable
• SDC-7 power adaptor
• User Manual

LAB POINTS

• high-end DJ controller designed for flexibility and optimal performance with all the most popular DJ programs rather than one program
• LAB EXCLUSIVO: all orders include FREE high-performance Oyaide Class B USB Cables from Japan (a 29.95 value! ships separately, online purchases only)
• true (4) channel layout and easy deck select control
• signature Vestax high-resolution JOG wheels (platters) are highly responsive to touch and can be adjusted to user's touch preference
• large aluminum filter knobs adds a tactile control that borrows from classic DJ mixers
• (2) pad control sections to control loops and samples with 3 banks (levels) of mapping
• low latency, high-resolution 24bit / 48kHz soundcard for top sound quality
• aux input allows you to connect and mix external sources (mic, CD turntables)
• XLR + 1/4" outputs for optimal sound quality
• compatible with Serato DJ(sold separately)

LAB REVIEW

With the VCI-400, Vestax has decided to forgo the software specific hardware design and go for the an all-out controller that is fully customizable and works well with all the most popular DJ programs (Traktor, Serato DJ Intro, Virtual DJ, Abelton, DJay, and more). Vestax has definitely shifted the focus to high quality functionality with enough controls and features to accommodate future software updates.

The VCI-400 does an excellent job in delivering both the flashy deluxe features (lighted pad controls, LED channel meters, wide assortment of controls) and the solid foundational features (high quality jog controls, XLR outputs, excellent soundcard). In addition, the design is very intuitive with all the controls placed seemingly perfectly and marked clearly. Although there is a lot going on, it all makes sense like the placement of the tempo controls with the deck select directly underneath.

OUR OPINION

Although the price point may be barrier for the beginner or novice DJ, we can see this being a longtime workhorse for the working DJ. The feature set eliminates the need for MIDI add-ons and with its high-quality soundcard and XLR outputs, you're ready to plug it into a club system. In addition, we just love the true 4 channel layout, the filter knobs, and the layout (it definitely borrows from a traditional turntable-mixer setup).

KEY FEATURES

• Mic input (XLR/PHONE combo jack) x 2
• Line input (RCA Stereo) x 2
• Master OutputԺ XLR x 2PHONE x 2
• Headphone output x 1Ժ6.3mm)
• Crossfader curve control x 1
• USB 2.0port (BUS power not supportedԺ
• POWERԺDC 7.5V / 1000mA (Power adaptor included)
• POWER CONSUMPTIONԺ4W (AC100V - 230V)
• DIMENSIONSԺ457(W) _ 328(D) _ 61(H)mm (including knobs)
• WEIGHTԺ4.5 kg

COMES WITH

• USB Cable
• SDC-7 pwer adaptor
• Virtual DJ LE 4 Decks
• bundled software MIDI assign guide
• overlays for blank (custom), Serato DJ Intro, Traktro, Virtual DJ LE, Traktor with morea available at Vestaxpro.com

Offical Vestax replacement power supply for the following mixers:

• VMC-004
• VMC-180
• PCV-150
• PMC-06T
• PMC-07PRO
• PMC-07PRO ISP
• PMC-15MK2
• PMC-25
• PMC-37PRO
• PMC-250

Official replacement line fader for all Vestax PMC-05 Pro and PMC-06 Pro mixers.

OVERVIEW

The VFX-1 is a dedicated USB effects control unit for use when DJing with the Vestax VCI-300 and ITCH.

FEATURES

The VFX-1 features 2 individual effect channels with 12 effects each (including flange, phase, HPF, LPF, echo, delay, reverb, crusher, tremolo, user 1-2-3), along with 3 large rotary control knobs to control the parameters for each effect. Each effect can then be fed into deck A or B, Master or even the AUX/Mic. A maximum of 3 parameters are adjustable for each effect and the BEATS knob instantly sets the beat ratio of the effect time in sync with the songs BPM (beats per minute) - alternatively you can use the TAP TEMPO to manually set the time. The VFX-1 uses a simple USB connection with your computer and runs with the power provided. Connecting the VCI-300 and VFX-1 together will activate the effect unit of serato ITCH with no special settings or installation required. Works with both VCI-300 and VCI-300MKII.

KEY FEATURES

• 2 separate effect channels
• 12 selectable effects (flange, phase, HPF, LPF, echo, delay, reverb, crusher, tremolo, user 1-2-3)
• 3 adjustable parameters per effect
• auto BPM or tap tempo
• large rotary knob for precise parameter control and feel
• selectable effect ON/OFF mode (Momentary & Latch)
• soft touch buttons
• Compatible with VCI-300/VCI-300MKII and ITCH controller products

OVERVIEW

The VMC-002XLu is the upgraded version of the popular (and now discontinued) VMC-002XL mixer. This new version gets a sleek black finish and adds a USB port for easy connectivity to your computer. It features a simple, durable 2 channel design, upgradable crossfader, and XLR outputs that get you professional level connectivity at a very inexpensive price. 

FEATURES

The VMC-002XLu is your basic entry level, 2 channel mixer, beefed up in terms of sound quality and durability and now the addition of a USB port. The USB port is a great since you can bypass the need for an interface and record vinyl or mixes directly into your computer (recording software needed). It has 2 phono and 2 line inputs (channel 1 and channel 2), plus 1 microphone input with volume control. Each channel has trim adjustment and 3 band EQs that go from completely off (kill) to +6dB. The crossfader is an ALPS fader (upgradeable to the CF-PCV) with a curve control switch on the front panel for "soft" or "sharp" crossfading. It also has a master/cue mix knob so you can practice in the headphones. As mentioned before, one of the main attractions of this mixer is the option for professional XLR outputs, which allow you to send a higher quality signal to any piece of equipment. The VMC-002XL also offers a standard RCA out, which you could use for your "record" out. 

OPINION

The VMC-002XL gives you excellent mid-level quality and features at a very economical price. It's an ideal choice for most non-club situations (home and small studio), and with its three band EQs and XLR outs could even be used in a club if you were in a pinch. Its compact size won't take up too much space, and it has all the necessary features for most djs (and digital DJs now with the addition of a USB port). Scratch DJs will like possibility of upgrading to a PCV crossfader and there really isn't much more you can ask for at this price range. Recommended.

KEY FEATURES

• 2 channel mixer 

• 1 microphone / 2 phono (RCA) / 2 line (RCA) inputs 

• USB port (USB cable not included) 

• band isolator EQs (-infinite/+6db) 

• master / cue switch for headphones 

• 2 master outputs: XLR and RCA 

• ALPS crossfader with curve control, upgradeable to PCV 

• 10.4" x 10.3" x 4.2" 

• 9 lbs.