replacement parts

One of the many great features of the TMA-1's design is the ability to easily swap out the ear cushions. Anyone who has heavily gigged on a pair of headphones knows how terrible it feels when the ear pads wear out. These replacement ear pads make the TMA's feel fresh as new and simply snap right in. Sold in pairs.

• Semi-Leather version feature firmer padding and higher level of isolation.
• Synthetic version has softer feel and softer padding with a lower (but still high) level of isolation.

Official replacement cable from AIAIAI, specifically made for the TMA-1.

• Coiled version is 5.2 feet long and recommended for DJing or studio applications.
• The Straight version is 3.9 feet long and lighter and recommended for everyday listening.

LAB POINTS

• custom high-end scratch fader, now fits popular controllers like KONTROL S4 and VCI-300
• advanced non-contact capacitance technology
• on-board curve and cut-in control
• tension control
• long life, ultra low maintenance
• 8mm steel fader stem

MANUFACTURER'S REVIEW

The Innobender is an Innofader with added special adapters designed to allow the Innofader to fit into extremely tight spaces. Currently we have done extensive testing and know the Innobender can fit into the following MIDI controller and mixer models:

• Vestax VCI-300
• Traktor S.4
• Pioneer DJM-400
• Pioneer DJM-350
• Stanton m.207
• Mackie d.2

LAB REVIEW

The Innobender gives the flexibility and control of the Innofader to controllers (S4 and VCI-300) and mixers with tight spaces (DJM-350/400). The Innofader is the most advanced fader on the market today and will suit the ever growing needs of all levels of DJs and turntablists by offering unparalleled levels of quality and adjustability that you cannot find in other faders. The Innofader features all new capacitance (non-contact) technology which means super long life, ultra low maintenance and no bleeding or cracking. With this non-contact technology so you can rest assured it will last and perform smoothly in even the harshest DJ environments. In addition, the Innofader comes with full on-board cut-in and curve control and tension adjustment so you can tweak and adjust the fader to your personal preference. The Innofader is very well constructed and features a solid steel 8mm fader stem (to withstand the punishment of heavy handed scratchers), and specially designed polished rails to ensure butter smooth performance. Recommended.

more info + purchase

LAB POINTS

• custom high-end scratch fader, now fits more mixers without extra adapters or mods
• advanced non-contact capacitance technology
• on-board curve and cut-in control
• tension control
• long life, ultra low maintenance
• 8mm steel fader stem

MANUFACTURER'S REVIEW

The Innofader Pro uses the same quality construction as the original Innofader and fits the following mixers:

• All of the Innofader compatible mixers (except for Ecler Eternal compatible mixers you will also need the Ecler Eternal Adapter)
• Rane TTM-56/57 and Pioneer DJM-800 without any extra adapters
• All A&H Xone mixers
• All mixers previously requiring the Innofader + Innofader Output Adapter (Tascam XS-4, XS-8, old Ecler HAK 300/310/320)
• Numark M series and Vestax VMC-002 without mods
• Virtually any analog mixer that fits it, but possibly requiring mods.

In addition to being compatible with a wider range of mixers, the Innofader Pro has the following improvements over the original Innofader:

• No polarity testing is required. The Innofader Pro is a plug and play device for most mixers.
• Works over a full +/- 15V or 0 to 30V range.
• Allows crossfader forward reverse switching on all compatible mixers.

KEY FEATURES

• custom high-end scratch fader, now fits more mixers without extra adapters or mods
• advanced non-contact capacitance technology
• on-board curve and cut-in control
• tension control
• long life, ultra low maintenance
• 8mm steel fader stem

LAB POINTS

• add external innofader control to inexpensive mixers (i.e. VMC-002, Numark M series)
• control fader cut-in & curve
• forward and reverse ("hamster") switch
• calibrate Innofader on-the-spot without the need to open the mixer
• compatible with all Innofader models

MANUFACTURER'S REVIEW

The Innojuster is a small box which allows the user to control all of the Innofader adjustments when installed with the Innofader. Use the Innojuster with the Innofader to turn your cheap analog mixer into a pro mixer.

Get more adjusment flexibilty on any mixer by tapping into the Innofader's wide range of adjustments from outside the mixer Includes the following controls:

• Cut-in: Allows adjustment of the dead space on each side of the crossfader. Adjustable from 0 to 10mm
• Curve: Allows a full range of curve adjustments from bottom to top cut and everything in-between
• Fwd/Rev switch: Switches between normal and hamster style fader operation
• X/Y: Switches between asymmetrical "Y" fader curves and left/right symmetrical "X" fader curves Mono VCA crossfaders (usually 3 pin) and analog crossfaders use "X" curves so crossfading action on both sides are identical Stereo VCA crossfaders (usually 4 pin) and line faders can use "Y" curves for a smooth output. With the switch, you can do some special customizations. Example: "Y" curve on a mono VCA crossfader can put a soft curve on CH1 and a hard curve on CH2 "X" curve on a stereo VCA crossfader can be used to do a CH1/CH2 switch in the center of the fader
• Calibration: Allows recalibration of the Innofader on-the-spot without the need to open the mixer. Compatible with all Innofader models

KEY FEATURES

• compatible with all Innofader models
• add external innofader control to inexpensive mixers (i.e. VMC-002, Numark M series)
• control fader cut-in & curve
• forward and reverse ("hamster") switch
• calibrate Innofader on-the-spot without the need to open the mixer

The Universal Headshell from Audio Technica works with most turntables with tonearms that accept screw-in headshells (which includes most DJ Turntables). This includes all Technics SL-1200 models, plus turntables by Stanton, Numark, Vestax, etc. Metallic silver finish.

COMES WITH

• Headshell wires 

The famous long-life, high quality HAK 360 crossfader. These feature a very similar feel and performance to Rane's TTM-56 crossfader, and come with a 5 YEAR warranty- unheard of for a crossfader.

FITS

• - HAK series 
• - NUO series
• - EVO5

Official Native Instruments power supply for Traktor AUDIO 6, AUDIO 10, and KONTROL S2 and KONTROL S4. Includes exchangeable adapter plugs (Euro, US, UK, SAA) for international outlets.

KEY FEATURES

• Input: 100-240 VAC, 60/50 Hz
• Output: 9 VDC, 1200 mA

COMES WITH

• exchangeable adapter plugs (Euro, US, UK, SAA)

MK2 Control vinyl for use with Traktor versions 2.1.1. and higher (will not work with older versions). Boasts the tightest time code control of any system to date for precision mixing and scratching. Marking stickers included.

Fits most turntables with tonearms that accept screw-in headshells. This includes all Numark models, plus Technics SL-1200 models and turntables by Stanton, Vestax, etc.

PRE-ORDER NOTE: The Obey Serato Pressing will ship in 2-4 weeks.

 Limit 2 Per Customer.

Easily the most anticipated release in Serato's Artist Series to date. They went big on this one and got Shepard Fairey, the man behind the OBEY movement. Fairey went from making from a simple sticker ("Andre The Giant Has A Posse") to creating a worldwide phenomenon with the OBEY campaign, and changed the way people see the urban landscape through street art. For his Serato pressing (the third in the Artist Series), Fairey has created 4 orignal pieces that adorn each side of the double LP set. No music on this one, just the Serato control tone on each side. Limited to 2000 pieces, recommended.

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.

COMES WITH

• Mounting screws
• Headshell wires

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.

COMES WITH

• Mounting screws
• Headshell wires

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.

COMES WITH

• Mounting screws
• Headshell wires

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.

COMES WITH

• Mounting screws
• Headshell wires

The SH-DK Evolution headshell is Ortofon's custom-designed, DJ-tested headshell that combines both style and functionality for DJs of all types. Featuring an easy-to-grip curved finger lift, a one-of-a-kind design and numerous weight options, it's an especially perfect fit for any Ortofon OM series DJ cartridge. Also included are additional weights (a yellow 1g and red 2g weight) and a specialized OM mounting tool, which makes it dramatically easier to mount OM series cartridges without any fuss.

COMES WITH

• Yellow 1g & Red 2g weight
• OM Mounting tool
• Headshell wires

Fits all Pioneer DJM Series mixers. 

Official replacement cue button for DJM-800 or DJM-1000. Works on of the mixer's channels.

Official Pioneer replacement effects button for DJM-800. This is the round button on the bottom right of the mixer that triggers your effects on or off. 

• Official replacement part fits all current Rane mixers.

• fits all Empath mixers
• qorks as both the crossfader and volume fader.

Intermediary piece used on Empath and TTM mixers. Fits between the metal knob and rubber knob cap on Empath and TTM mixer controls (EQ, gain, etc). Rubber knob tops sold separately.

This is the screw-on cap that keeps the ground wires in place. Works with all Rane mixers.

Fits  most knob controls on TTM series mixers. Does not fit the Sixty series mixers.

• 120 VAC (US) version
• works with TTM mixers and all Rane products which have the red RJ-12 connector (looks like a telephone jack)
• does not work with the SL 1 or for Scratch Live

• work with SL 2, SL 3, SL 4
• includes different input plugs for the USA, Europe, UK and Australia
• regulated 7.5 volts DC, 1 amp, using a P6 type barrel plug
• does not work with the SL 1

• sold in pairs
• more durable than CD-Rs

Official control vinyl for Serato. Works only with Serato.

Official 2nd edition Serato Control vinyl. For use with Serato only.

Fits Rane TTM54i and TTM56 only. 

The second installment of Serato Artist Series features Misery, the alter-ego of prominent New Zealand-born artist Tanja Jade. Her signature characters - which are "cheeky, whimsical, cute, and always dark" - grace the super lightweight control vinyl, with sides a and b done in different colorways. This limited edition pressing is one of Misery's final commissions, as Jade has decided to part with the "overbearing, dark influence" after 13 years, rendering the pic disc an instant collectible. One record per package, so act quick and seriously consider grabbing doubles!

For Shure's 35 series of cartridges (SC35C, M35X, M35S, etc).

COMES WITH

• headshell wires
• stylus brush
• cartridge screws (2 lengths)
• spacers
• washers
• headshell weight

Replacement parts for Shure's 44 series cartridges (M44-7, M44-G).

COMES WITH

• screwdriver
• 1 set of headshell wires
• stylus brush
• cartridge screws (2 lengths)
• spacers + washers
• headshell weight

LAB REVIEW

Sumiko's HL-29 headshell leads are constructed of silk wrapped, linear crystal OFC Litz wire with gold plated terminals for improved sound definition. Can replace standard or broken wires and works with most tonearms/headshells. 4 wires per set.

Official Technics replacement 33RPM speed select button. Fits Technics 1200 turntables. Made in Japan. 

Authentic Technics replacement part. Stainless steel. Fits all Technics 1200 models. 

Official Technics replacement 45RPM speed select button. Fits Technics 1200 turntables. Made in Japan.

Fits all Technics SL-1200 models.

Official Technics replacement counterweight/tone arm balance in GOLD. Fits all 1200 models. Made in Japan.

Fits all Technics SL-1200 models. Does not come with hinges.

Fits all Technics SL-1200 model dust covers. One hinge per order.

Fits most turntables with tonearms that accept screw-in headshells. This includes all SL-1200 models, plus turntables by Stanton, Numark, Vestax, etc.

Fits:

• Technics SL-1200MK5
• Technics SL-1210MK5
• Technics SL-1200M3D

Soldering and complex work is required.

Fits Technics 1200 pitch sliders.

Official Technics replacement RCA cord. Works with Technics 1200 turntables. Made in Japan.

Fits all Technics SL-1200 models. Soldering required.

Replace worn out earpads on your Technics RPDHJ1200's with this official replacement and extend the life of your headphones.