Pro-Ject

LAB POINTS

• high design and sound quality at affordable price
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
  
• includes Sumiko Pearl cartridge
• MDF base and platter (dense wood material)
• designed for low vibration

MANUNFACTURER'S REVIEW

The RM-1.3 is designed to look and perform like no other affordable turntable. Featuring a Sumiko Pearl moving magnet cartridge that is factory mounted for your convenience, the RM-1.3 delivers musical fidelity that belies its price. A resonance-optimized MDF platter with a felt mat rests upon a three-point MDF plinth with an isolated motor assembly optimized for low noise and speed stability. The RM-1.3 incorporates an inverted chrome plated stainless steel axle that rests on a polished steel bearing in a bronze housing for low wow-and-flutter and speed accuracy. Three nylon cone feet further reduce noise and vibration. A single-piece fixed headshell 9_ S-shaped tonearm features hardened stainless steel bearings and rigid aluminum tube to provide superb tracking. Accurate adjustment of both VTA and azimuth is easily accomplished. Detachable RCA interconnect cables included.

KEY FEATURES

• hi-fi turntable with radically designed shape
• manual, belt-drive operation
• S-shaped 8.6" tone-arm
• quiet running synchronous motor with a two-step pulley drives the platter's outside edge via a rubber belt
• isolated drive motor decoupled from the base to eliminate vibration transmission
• resonance-optimised platter made of medium density fibre
• inverted, chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing housing
• gold plated phono sockets and grounding screw
• external power supply avoids potential electro-mechanical interference

COMES WITH

• Sumiko Pearl Cartridge
• felt mat

The Design Box 2IP keeps your Pro-Ject audio components neat and organized by framing them in a high gloss acrylic box. The Design Box is designed to hold either one Box Design SE component or 2 small size Box Design units, one of which can be an iPod/iPhone dock. The box also features a unique locking mechanism that positions and fixes the component(s) securely into the frame.

• holds 1x Box Design SE component or 2x small Box Design units
• can hold an iPod/iPhone dock unit
• dimensions: 4.5" x 3.6" x 7.9"

Sign up for Restock Email Notification (on the right) to receive a one-time notification when this item becomes available. If there is an "add to cart" button, this item can be purchased immediately. Full review and images to follow.

• 121912

LAB POINTS

• leather construction
• improves sound, offers special sound characteristics
• dampens resonance from metal turntables
• less noise, avoids static load
• can be used with any turntable
• NOT recommended for DJing and backcueing

REVIEW

Pro-Ject's Leather It record mat is an upgrade to standard felt mats and improve the sound of your favorite records by dampening resonance and lowering overall noise and static. How does a leather slipmat do all this? Pro-Ject describes it best - "Turntable mats have been always a big discussion how they influence the sound. The interaction between the record and the surface can be tracked very easily by the super sensitivity of a good pick up cartridge. Common felt mats give a smooth contact between record and platter but has the disadvantage with static. That means that felt mats often collect a lot of dust which can be then transferred to the record. Also the damping ability is very limited which can be a problem with metal platters. Thick rubbermats over damp the record and have an isolation effect which leaves the static on the record and hearable noise clicks are the result. Leather and Cork are two different, but very interesting options to upgrade the sound quality. Resonances are dampened more effectively than felt, and they keep dust away and avoid static. What is better depends on taste and the actual platter design. A very cost effective way to improve the sound and have less noise by static and dust."

LAB POINTS

• upgraded with built-in phono preamp + USB output
• upgraded Ortofon OM5e cartridge (standard Essential feature 0M3e)
• Pro-Ject's base turntable; better than most turntables at this price range
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
• belt drive motor

LAB REVIEW

The Essential is a pared-down version of the bestselling Debut Carbon. Featuring a much lower-price point, the Essential remains a solid listening turntable boasting excellent sound and sleek, minimalist design. When selecting between the Essential and $100-300 plastic turntables, the Essential is still the obvious pick. The addition of the built-in phono preamp allows you to send a line level signal to your amp or speakers, plus the USB connection offers a simple way to record or play your records through your MAC or PC.

KEY FEATURES

• USB output to MAC/PC
• integrated Phone-MM preamplifier
• line level RCA output
• low vibration synchronous motor
• 8.6" aluminum tone-arm
• manual, belt drive operation
• platter made of MDF (Medium Density Fibreboard, a very dense engineered wood material)
• base made of stiff particle board

COMES WITH

• Ortofon OM5e cartridge
• felt platter mat
• dustcover

APPENDIX: ESSENTIAL vs. DEBUT CARBON

• Carbon has upgraded cartridge, tonearm, and drive mechanisms
• Carbon has an upgraded, heavier platter and base.

LAB POINTS

• upgraded with built-in phono preamp + USB output
• upgraded Ortofon OM5e cartridge (standard Essential feature 0M3e)
• Pro-Ject's base turntable; better than most turntables at this price range
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
• belt drive motor

LAB REVIEW

The Essential is a pared-down version of the bestselling Debut Carbon. Featuring a much lower-price point, the Essential remains a solid listening turntable boasting excellent sound and sleek, minimalist design. When selecting between the Essential and $100-300 plastic turntables, the Essential is still the obvious pick. The addition of the built-in phono preamp allows you to send a line level signal to your amp or speakers, plus the USB connection offers a simple way to record or play your records through your MAC or PC.

KEY FEATURES

• USB output to MAC/PC
• integrated Phone-MM preamplifier
• line level RCA output
• low vibration synchronous motor
• 8.6" aluminum tone-arm
• manual, belt drive operation
• platter made of MDF (Medium Density Fibreboard, a very dense engineered wood material)
• base made of stiff particle board

COMES WITH

• Ortofon OM5e cartridge
• felt platter mat
• dustcover

APPENDIX: ESSENTIAL vs. DEBUT CARBON

• Carbon has upgraded cartridge, tonearm, and drive mechanisms
• Carbon has an upgraded, heavier platter and base.

LAB POINTS

• leather construction
• improves sound, offers special sound characteristics
• dampens resonance from metal turntables
• less noise, avoids static load
• can be used with any turntable
• NOT recommended for DJing and backcueing

REVIEW

Pro-Ject's Leather It record mat is an upgrade to standard felt mats and improve the sound of your favorite records by dampening resonance and lowering overall noise and static. How does a leather slipmat do all this? Pro-Ject describes it best - "Turntable mats have been always a big discussion how they influence the sound. The interaction between the record and the surface can be tracked very easily by the super sensitivity of a good pick up cartridge. Common felt mats give a smooth contact between record and platter but has the disadvantage with static. That means that felt mats often collect a lot of dust which can be then transferred to the record. Also the damping ability is very limited which can be a problem with metal platters. Thick rubbermats over damp the record and have an isolation effect which leaves the static on the record and hearable noise clicks are the result. Leather and Cork are two different, but very interesting options to upgrade the sound quality. Resonances are dampened more effectively than felt, and they keep dust away and avoid static. What is better depends on taste and the actual platter design. A very cost effective way to improve the sound and have less noise by static and dust."

LAB POINTS

• our bestselling listening turntable at this price range
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
  
• excellent value for less than $400
• includes high-end Ortofon 2M Red Cartridge
• fuller, richer sound via Carbon Fiber tonearm
• belt drive motor
• removable RCA cable
• gloss red finish

LAB REVIEW

The Pro-Ject Debut Carbon turntable is a resouding upgrade to their popular Debut III turntable. The Debut Carbon features an Ortofon 2M Red Cartridge upgrade for fuller richer sound (better sound than Ortofon OM5e that came with the Debut III), a Carbon Fiber tonearm usually found in higher end turntables, and a completely redesigned, vibration-dampening inner-body. Boasting an excellent price point (same as the colored Debut III), but with improved hi-fi features and better cartridge, the Debut Carbon is an excellent entry to mid-level audiophile deck or a simply beautiful looking listening turntable.

Beyond its sleek exterior, the quality features run deep with the aforementioned upgrades plus a low-tolerance chrome-plated stainless-steel axle that runs on a polished ball bearing in a brass bearing housing; a reduced vibration motor; and resonance damping feet. All of those features equate to a better listening experience versus your basic $200.00 turntable. A consistent bestseller online and at our stores, highly recommended.

KEY FEATURES

• 8.6" Carbon tube tone-arm
• manual, belt drive operation
• base made of MDF (Medium Density Fibreboard, a very dense engineered wood material)
• 12" balanced steel platter
• low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
• motor decoupled to reduce vibration
• resonance damping feet

COMES WITH

• Ortofon 2M Red Cartridge
• felt platter mat
• dustcover

APPENDIX: CARBON vs. DEBUT III

• Debut Carbon replaced the Debut III in 2011-12
• upgraded Ortofon OM10 Cartridge for better sound quality
• new Carbon Fiber tonearm reduces resonance and provides better sound quality
• larger 12" balanced steel platter (vs. 11" platter on Debut III)
• redesigned body and suspension for less vibration
• RCA cable is removable
• this version adds USB connectivity

LAB POINTS

• wall mount surface for turntables
• welded steel frame construction
• four height adjustable spikes level the board
• veneered wooden board
• black finish
• turntable surface measures 18.1" x 13.9"

REVIEW

Pro-Ject's Wall Mount It 1 gives you everything you need to mount your turntable or equipment to your wall, clearing up shelf or floor space. The sturdy welded steel frame keeps your turntable secure while four height-adjustable spikes allow you to level the veneered wooden board surface. Comes in sleek a black finish.

TECH SPECS

• welded steel frame
• adjustable board
• surface area measures 18.1" x 13.9"
• overall dimensions: 18.1" x 3.5" x 16.3"

The Design Box 2IP keeps your Pro-Ject audio components neat and organized by framing them in a high gloss acrylic box. The Design Box is designed to hold either one Box Design SE component or 2 small size Box Design units, one of which can be an iPod/iPhone dock. The box also features a unique locking mechanism that positions and fixes the component(s) securely into the frame.

• holds 1x Box Design SE component or 2x small Box Design units
• can hold an iPod/iPhone dock unit
• dimensions: 4.5" x 3.6" x 7.9"

LAB POINTS

• audiophile-grade phono preamp
• allows you to plug a turntable directly into a stereo system, amplifier, computer, or any other device that takes line level input
• gold plated RCA inputs and outputs
• high quality metal casing offers shielding from both vibration and electromagnetic interference
• new "green" DC power supply (extremely low idle power usage)
• switch for Moving Magnet (MM) and Moving Coil (MC) cartridges (most cartridges are MM)
• low noise, low distortion
• flat RIAA equalization curve with 60dB of gain (MC), 40 dB gain (MM)
• also available in USB version

KEY FEATURES

• Input Impedence MM: 47k ohms / 120pf
• Input Impedence MC: 100 ohms / 120pF
• Gain MM: 40dB
• Output Voltage MM: 300mV / 1 kHz or 3mV
• Gain MC: 60 dB
• Output Voltage MC: 200 mV / 1 kHz or 0.3 mV
• Noise MM: 86 dB (94 dB - A weighted)
• Noise MC: 68 dB (75 dB - A weighted)
• THD: MM 0.01% / MC 0.05%
• Max. Output: 9.5 V
• RIAA EQ Curve Accuracy: 20 Hz - 20 kHz / max 0.5 dB
• Power Consumption: 18 V / 80 mA DC
• Power Supply: 18 V / 500 mA DC
• Dimensions (WHD): 4.1 x 1.4 x 4.1 in., 103 x 36 x 103 mm
• Weight: 1.3 lbs., 570 g

COMES WITH

• power supply

LAB POINTS

• limited edition turntable design
• includes high-end Sumiko Blue Point No.2 Moving Coil Cartridge ($499.00 retail when purchased separately)
• includes high-end Pro-Ject Connect-It Tonearm cable ($99.00 retail when purchased separately)
• belt drive turntable with single pivot tonearm
• MDF platter (medium-density fibreboard) with felt mat
• transparent acrylic base
• dual speed: 33 / 45 rpm
• three height-adjustable rubber-damped aluminum cone feet reduces noise and vibration
• does not include dust cover

LAB REVIEW

The Pro-Ject 2-Xperience Basic+ Turntable is a limited edition that marries Pro-Ject's midrange and high-end models. Starting with their well-received Essential tonearm, Pro-Ject has taken the best features of their 2-Xperience line (which starts at $1299.00) including the motor assembly and chassis construction. In addition, they've included a high-end cartridge and an audiophile-grade tonearm cable. Last but not least, the acrylic base gives this turntable a striking look that would enhance any environment.

KEY FEATURES

• power supply: 16 volt
• 18.3 x 5.2 x 13.4 in., 465 x 130 x 340 mm
• 14lbs., 6.4kg

COMES WITH

• Sumiko Blue Point No.2 Moving Coil Cartridge
• Connect-It Tonearm cable
• felt platter mat

LAB POINTS

• audiophile quality sound reproduction
• balanced sound with clean bass, tight mids and crisp highs
• classic hi-fi design
• adjustable leather headband
• soft memory foam ear cushions
• high gloss & metal finish
• tangle-resistant woven cord

LAB REVIEW

From Pro-Ject, the makers of our best-selling audiophile turntables, come the Hear-It One Headphones. Pro-Ject has been crafting high end audio gear and accessories for over 20 years, so it really comes as no surprise that the Hear-It Ones sound incredible. Featuring a classic design aesthetic and audiophile grade audio reproduction, the Hear-It One's will complement any listening set up, whether analog or digital. Hear all the fine details in your music with powerful 38mm neodymium drivers, and stay comfortable during extended listening sessions with the adjustable leather headband and soft, memory foam ear pads. We tried them on here at the office and were immediately impressed by the sound reproduction – clean bass (very balanced and not at all overpowering) tight mids, and crisp highs. The Hear It Ones also come with a tangle-resistand woven cable, and a handy carrying pouch with official Pro-Ject markings. Recommended.

TECH SPECS

• 38mm neodymium driver
• frequency response: 10 - 22,000Hz
• sensitivity: 101dB @ 1mW (+/-3dB)
• max sound pressure: 126 dB
• impedance: 32 Ohms
• maximum power input: 200mW
• weight: 178g

INCLUDES

• gold 1/4" adapter
• carrying pouch

Pro-Ject's Acryl-It Platter Upgrade is both a sonic and aesthetic upgrade to your Debut Series, 1Xpression, or 1Xpression II. The platter is crafted of a dense acrylic material that actually lowers background noise and clarifies the bass and highs to make the music more 3-dimensional. Not only that, the Acryl-It makes your turntable look much more visually appealing with its clear body. Can be used with or without a slipmat on top.

• works with Pro-Ject Debut Series, 1Xpression, or 1Xpression II turntables as well as Music Hall MMF-2.2. and 5.1 turntables
• lowers background noise
• improved bass and highs

LAB POINTS

• compact, integrated stereo amplifier
• 30 watts per channel
• Bi-Phase PWM (Pulse-Width Modulation) digital amplifier circuit
• shielded metal chassis
• gold plated RCA inputs
• a great match for the Pro-Ject Speaker Box 5

REVIEW

Compact integrated stereo amplifier from Pro-Ject. The Stereo Box S achieves both a sound quality and SPL output that is impressive for its small size. Designed around a Bi-Phase PWM (Pulse-Width Modulation) digital amplifier circuit, the Stereo Box S achieves a remarkable 80% operational efficiency and a highly dynamic 30 watts per channel output into 4 ohms. The shielded metal chassis protects the circuitry from vibration and electromagnetic interference for the highest fidelity possible. Works great with the Pro-Ject Speaker Box 5.

TECH SPECS

• Output Power: 2 x 20W / 30W @ 8 Ohm / 4 Ohm (both channels driven)
• Frequency Response: 5Hz - 20kHz (+ 0dB, - 0.5dB)
• Channel Separation: > 40dB @ 20kHz
• Signal to Noise Ratio: > -100dB (IEC -A)
• Line Level Inputs: 2x RCA Jacks
• Input Impedance: 20k ohms
• Record Out: 3.5mm Jack Plug
• Power Supply: 20V / 3A DC (peak 7A DC)
• Max Power Surge: 20V / 3A DC
• Dimensions (WHD): 4.1 x 1.4 x 4.8 in.
• Weight: 1.6lbs.

LAB POINTS

• high-end audiophile phono preamp with tube technology
• for advanced audiophiles, this a great entry level tube phono stage
• boasts "lively and powerful with convincing soundstaging and emotional presentation"
• improvements in Tube Box S model: improved circuitry and better components
• gold plated RCA inputs and outputs
  
• double mono triode output stage
• high quality metal casing offers shielding from both vibration and electromagnetic interference

KEY FEATURES

• Tubes: 2 x ECC83 (12AX7A) Triode Output
• Load Capacity: 50. 150, 270 and 370pF with 47k ohm settings only; 10,
• 100, 1k, 2k ohm, typical for low output MC cartridges
• Load Impedance: 47k ohm, typical for MM or high-output MC cartridges
• Gain: 41dB, typical for MM or high-output MC cartridges
• 51dB or 61dB typical for low-output MC cartridges
• Noise MM: 84dB (94dB - A weighted)
• Noise MC: 67 dB (75 dB A-Weighted)
• THD MM: 0.01%
• THD MC: 0.05%
• RIAA EQ Curve Accuracy: 20 Hz - 20 kHz / max 0.4 dB
• Power Consumption: 18 V / 470 mA AC
• Power Supply: Mains-fed Outboard Power Supply
• Output Voltage: 16 V / 1000 mA AC
• Dimensions (WHD): 4.1 x 3 x 5 in., 103 x 74 x 112 mm
• Weight: 1.8 lbs., 810 g

COMES WITH

• power supply

LAB POINTS

• upgrades your headphone signal from standard quality to audiophile quality
• boasts "significantly better sound" from standard headphone outputs and "rich colourful presentation, very close to reality"
• high quality metal casing offers shielding from both vibration and electromagnetic interference
• 1/4" output, power switch, volume control on front
• gold plated RCA inputs and loop outputs
• suitable for headphones with low or high impedance

LAB REVIEW

Conventional outputs found on most audio equipment and computers are not optimized for headphone usage. The Head Box S converts any audio output into a high quality headphone signal meant for "natural dynamics, transparency and pure audiophile enjoyment."

KEY FEATURES

• power output: 330mW/30 ohms, 60mW/300 ohms
• output impedance: > 30 ohms
• signal to noise ratio: 87dB (100dB - IEC -A) at full output
• gain: 11dB
• dimensions: 103 x 36 x 103 mm, 600g

COMES WITH

• power supply

LAB POINTS

• audiophile-grade phono preamp with high quality Digial Audio Converter (DAC)
• by using USB output, bypass the low-grade internal sound card in your computer
• allows you to plug a turntable directly into a stereo system, amplifier, computer, or any other device that takes line level input
• great for recording vinyl on your computer (recording software sold separately)
• USB output, gold plated RCA inputs and outputs (both can be used simultaneously, no need to unplug)
• high quality metal casing offers shielding from both vibration and electromagnetic interference
• new "green" DC power supply (extremely low idle power usage)
  
• switch for Moving Magnet (MM) and Moving Coil (MC) cartridges (most cartridges are MM)
• low noise, low distortion
• flat RIAA equalization curve with 60dB of gain (MC), 40 dB gain (MM)
• also available in non-USB version

KEY FEATURES

• Input Impedence (MM): 47k ohms / 120pf
• Input Impedence (MC): 100 ohms / 120pF
• Gain (MM): 40dB
• Output Voltage: 300mV / 1 kHz at 3 mV / 1 kHz (MM input)
• Gain (MC): 60 dB
• Output Voltage: 300 mV / 1 kHz or 0.3 mV
• Max. Output: 9.5 V (1 kHz)
• Noise Floor (MM): 86 dB (94 dB - A weighted)
• Noise Floor (MC): 68 dB (75 dB - A weighted)
• THD (MM): < 0.01 %
• THD (MC): < 0.05 %
• RIAA EQ Curve Accuracy: 20 Hz - 20 kHz, > 0.5 dB
• A/D Converter: 16-Bit Delta Sigma
• Sampling Rate: 32, 44.1 and 48 kHz
• USB Output: Digital Serial Data Protocol USB 1.1
• Operating Systems: Windows XP, Windows Vista, Windows 7 and MacOS
• Standy Power Consumption: < 1 W
• Dimensions (WHD): 4.1 x 1.4 x 4.1 in., 103 x 36 x 103 mm
• Weight:1.2 lbs., 540 g

COMES WITH

• power supply

LAB POINTS

• audiophile-grade phono preamp
• allows you to plug a turntable directly into a stereo system, amplifier, computer, or any other device that takes line level input
• gold plated RCA inputs and outputs
• high quality metal casing offers shielding from both vibration and electromagnetic interference
• new "green" DC power supply (extremely low idle power usage)
• switch for Moving Magnet (MM) and Moving Coil (MC) cartridges (most cartridges are MM)
• low noise, low distortion
• flat RIAA equalization curve with 60dB of gain (MC), 40 dB gain (MM)
• also available in USB version

KEY FEATURES

• Input Impedence MM: 47k ohms / 120pf
• Input Impedence MC: 100 ohms / 120pF
• Gain MM: 40dB
• Output Voltage MM: 300mV / 1 kHz or 3mV
• Gain MC: 60 dB
• Output Voltage MC: 200 mV / 1 kHz or 0.3 mV
• Noise MM: 86 dB (94 dB - A weighted)
• Noise MC: 68 dB (75 dB - A weighted)
• THD: MM 0.01% / MC 0.05%
• Max. Output: 9.5 V
• RIAA EQ Curve Accuracy: 20 Hz - 20 kHz / max 0.5 dB
• Power Consumption: 18 V / 80 mA DC
• Power Supply: 18 V / 500 mA DC
• Dimensions (WHD): 4.1 x 1.4 x 4.1 in., 103 x 36 x 103 mm
• Weight: 1.3 lbs., 570 g

COMES WITH

• power supply

LAB POINTS

• Pro-Ject's most affordable phono preamplifier
• allows you to plug a turntable directly into a stereo system, amplifier, computer, or any other device that takes line level input.
• low noise, low distortion
• RCA inputs and outputs
• flat RIAA equalization curve (what you want for a preamp)

LAB REVIEW

Most turntables need a phono preamp to work with stereos, computers, and speaker systems (unless your device has a "phono" input, which is rare). The Phono Box MM is a simple, cost effective solution which will convert your phono output into a low noise, low distortion, line level output.

KEY FEATURES

• input impedence: 7k ohms / 100pF
• gain: 32dB F
• output voltage: 200mV / 1 kHz at 5mV
• signal to noise ratio: 82 dB (88 dB / A-weighted)
• input impedence: 7k ohms / 100pF
• dimensions: .2 x 1.2 x 2.4 in., 107 x 30 x 61 mm; 9.9 oz., 280 g

COMES WITH

• power supply

LAB POINTS

• upgraded USB version of our bestselling listening turntable
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
  
• excellent value for less than $500
• includes high-end Ortofon OM10 Cartridge
• fuller, richer sound via Carbon Fiber tonearm
• belt drive motor
• removable RCA and USB cable
• glossy piano black finish

LAB REVIEW

The Pro-Ject Debut USB Carbon turntable is a resouding upgrade to their popular Debut III turntable. The Debut Carbon USB features an Ortofon OM10 Cartridge upgrade for fuller richer sound (better sound than Ortofon OM5e that came with the Debut III), a Carbon Fiber tonearm usually found in higher end turntables, and a completely redesigned, vibration-dampening inner-body. Boasting an excellent price point, but with improved hi-fi features, USB connectivity, and better cartridge, the Debut Carbon USB is an excellent entry to mid-level audiophile deck or a simply beautiful looking listening turntable.

Beyond its sleek exterior, the quality features run deep with the aforementioned upgrades plus a low-tolerance chrome-plated stainless-steel axle that runs on a polished ball bearing in a brass bearing housing; a reduced vibration motor; and resonance damping feet. All of those features equate to a better listening experience versus your basic $200.00 turntable. A consistent bestseller online and at our stores, highly recommended.

KEY FEATURES

• 8.6" Carbon tube tone-arm
• manual, belt drive operation
• base made of MDF (Medium Density Fibreboard, a very dense engineered wood material)
• 12" balanced steel platter
• low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
• motor decoupled to reduce vibration
• resonance damping feet

COMES WITH

• Ortofon 2M Red Cartridge
• felt platter mat
• dustcover
  

APPENDIX: CARBON vs. DEBUT III

• Debut Carbon replaced the Debut III in 2011-12
• upgraded Ortofon OM10 Cartridge for better sound quality
• new Carbon Fiber tonearm reduces resonance and provides better sound quality
• larger 12" balanced steel platter (vs. 11" platter on Debut III)
• redesigned body and suspension for less vibration
• RCA cable is removable
• this version adds USB connectivity

LAB POINTS

• our bestselling listening turntable at this price range
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
  
• excellent value for less than $400
• includes high-end Ortofon 2M Red Cartridge
• fuller, richer sound via Carbon Fiber tonearm
• belt drive motor
• removable RCA cable
• clean white finish

LAB REVIEW

The Pro-Ject Debut Carbon turntable is a resouding upgrade to their popular Debut III turntable. The Debut Carbon features an Ortofon 2M Red Cartridge upgrade for fuller richer sound (better sound than Ortofon OM5e that came with the Debut III), a Carbon Fiber tonearm usually found in higher end turntables, and a completely redesigned, vibration-dampening inner-body. Boasting an excellent price point (same as the colored Debut III), but with improved hi-fi features and better cartridge, the Debut Carbon is an excellent entry to mid-level audiophile deck or a simply beautiful looking listening turntable.

Beyond its sleek exterior, the quality features run deep with the aforementioned upgrades plus a low-tolerance chrome-plated stainless-steel axle that runs on a polished ball bearing in a brass bearing housing; a reduced vibration motor; and resonance damping feet. All of those features equate to a better listening experience versus your basic $200.00 turntable. A consistent bestseller online and at our stores, highly recommended.

KEY FEATURES

• 8.6" Carbon tube tone-arm
• manual, belt drive operation
• base made of MDF (Medium Density Fibreboard, a very dense engineered wood material)
• 12" balanced steel platter
• low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
• motor decoupled to reduce vibration
• resonance damping feet

COMES WITH

• Ortofon 2M Red Cartridge
• felt platter mat
• dustcover

APPENDIX: CARBON vs. DEBUT III

• Debut Carbon replaced the Debut III in 2011-12
• upgraded Ortofon OM10 Cartridge for better sound quality
• new Carbon Fiber tonearm reduces resonance and provides better sound quality
• larger 12" balanced steel platter (vs. 11" platter on Debut III)
• redesigned body and suspension for less vibration
• RCA cable is removable
• this version adds USB connectivity

LAB POINTS

• our bestselling listening turntable at this price range
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
  
• excellent value for less than $400
• includes high-end Ortofon 2M Red Cartridge
• fuller, richer sound via Carbon Fiber tonearm
• belt drive motor
• removable RCA cable
• glossy piano black finish

LAB REVIEW

The Pro-Ject Debut Carbon turntable is a resouding upgrade to their popular Debut III turntable. The Debut Carbon features an Ortofon 2M Red Cartridge upgrade for fuller richer sound (better sound than Ortofon OM5e that came with the Debut III), a Carbon Fiber tonearm usually found in higher end turntables, and a completely redesigned, vibration-dampening inner-body. Boasting an excellent price point (same as the colored Debut III), but with improved hi-fi features and better cartridge, the Debut Carbon is an excellent entry to mid-level audiophile deck or a simply beautiful looking listening turntable.

Beyond its sleek exterior, the quality features run deep with the aforementioned upgrades plus a low-tolerance chrome-plated stainless-steel axle that runs on a polished ball bearing in a brass bearing housing; a reduced vibration motor; and resonance damping feet. All of those features equate to a better listening experience versus your basic $200.00 turntable. A consistent bestseller online and at our stores, highly recommended.

KEY FEATURES

• 8.6" Carbon tube tone-arm
• manual, belt drive operation
• base made of MDF (Medium Density Fibreboard, a very dense engineered wood material)
• 12" balanced steel platter
• low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
• motor decoupled to reduce vibration
• resonance damping feet

COMES WITH

• Ortofon 2M Red Cartridge
• felt platter mat
• dustcover
  

APPENDIX: CARBON vs. DEBUT III

• Debut Carbon replaced the Debut III in 2011-12
• upgraded Ortofon OM10 Cartridge for better sound quality
• new Carbon Fiber tonearm reduces resonance and provides better sound quality
• larger 12" balanced steel platter (vs. 11" platter on Debut III)
• redesigned body and suspension for less vibration
• RCA cable is removable
• this version adds USB connectivity

Works with:

• Pro-Ject Debut Carbon
• Pro-Ject Debut II
• Pro-Ject Debut III
• Pro-Ject Debut III USB
• Pro-Ject 1.2
• Pro-Ject 1Xpression
• Pro-Ject Xpressioin II
• Pro-Ject Xpression III
• RPM 5.1
• RPM 6.1

LAB POINTS

• passive speakers (requires an amplifier)
• audiophile quality sound reproduction
• 2-way monitor w/ bass reflex system
• 25mm silk dome tweeter, 130mm bass driver
• available in high gloss piano black and white

MANUFACTURER'S REVIEW

The Pro-Ject Speaker Box 5 is an audiophile 2-way monitor speaker using a bass reflex system for tight and clear bass. It features a reflex port on back side and is ideal for use with other Pro-Ject/Box Design components.

• Bass-reflex principle
• 25mm silk-dome tweeter
• 130mm bass-mid driver
• 55Hz-20kHz frequency response
• 8 ohm impedance
• 86dB efficiency (1W/1m)
• 10W-150W suggested amplifier power
• Magnetic screening of chassis
• Black cloth speaker grill with magnetic fittings
• Dimensions: 8.97" x 8.97" x 7.8"
• Weight: 9.2 lbs

COMES WITH

• Wall mount

LAB POINTS

• high design and sound quality at affordable price
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
  
• includes Sumiko Pearl cartridge
• MDF base and platter (dense wood material)
• designed for low vibration

MANUNFACTURER'S REVIEW

The RM-1.3 is designed to look and perform like no other affordable turntable. Featuring a Sumiko Pearl moving magnet cartridge that is factory mounted for your convenience, the RM-1.3 delivers musical fidelity that belies its price. A resonance-optimized MDF platter with a felt mat rests upon a three-point MDF plinth with an isolated motor assembly optimized for low noise and speed stability. The RM-1.3 incorporates an inverted chrome plated stainless steel axle that rests on a polished steel bearing in a bronze housing for low wow-and-flutter and speed accuracy. Three nylon cone feet further reduce noise and vibration. A single-piece fixed headshell 9_ S-shaped tonearm features hardened stainless steel bearings and rigid aluminum tube to provide superb tracking. Accurate adjustment of both VTA and azimuth is easily accomplished. Detachable RCA interconnect cables included.

KEY FEATURES

• hi-fi turntable with radically designed shape
• manual, belt-drive operation
• S-shaped 8.6" tone-arm
• quiet running synchronous motor with a two-step pulley drives the platter's outside edge via a rubber belt
• isolated drive motor decoupled from the base to eliminate vibration transmission
• resonance-optimised platter made of medium density fibre
• inverted, chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing housing
• gold plated phono sockets and grounding screw
• external power supply avoids potential electro-mechanical interference

COMES WITH

• Sumiko Pearl Cartridge
• felt mat

LAB POINTS

• Pro-Ject's base turntable; better than most turntables at this price range
• LAB EXCLUSIVO: all orders include FREE Lab Turntable Pack which includes a TTL Carbon Fiber Record Brush and (1) high-quality TTL PH Slipmat  (a 30.00 value! ships separately)
  
• includes Ortofon OM3e cartridge
• belt drive motor

LAB REVIEW

The Essential is a pared-down version of the bestselling Debut Carbon. Featuring a much lower-price point, the Essential remains a solid listening turntable boasting excellent sound and sleek, minimalist design. When selecting between the Essential and $100-300 plastic turntables, the Essential is still the obvious pick.

KEY FEATURES

• low vibration synchronous motor
• 8.6" aluminum tone-arm
• manual, belt drive operation
• platter made of MDF (Medium Density Fibreboard, a very dense engineered wood material)
• base made of stiff particle board

COMES WITH

• Ortofon OM3e cartridge
• felt platter mat
• dustcover

APPENDIX: ESSENTIAL vs. DEBUT CARBON

• Carbon has upgraded cartridge, tonearm, and drive mechanisms
• Carbon has an upgraded, heavier platter and base.

• works with all turntables
• for everyday listening, improves sound quality by dampening vibrations
• for vinyl DJ use, nullifies some of the vibrations created by sound systems
• made of heavyweight metal with felt application bottom
• includes wooden storage case