Odyssey

Odyssey's ATA Flite-Ready case features two individual compartments that hold a total of 120 7" records. Chrome plated hardware and a removable foam padded lid gives your 45s the protection they deserve.

KEY FEATURES

• Dimensions (exterior): 20"W x 11"H x 11"D
• 2 rows
• holds 120 7"s
• removable foam padded lid
• chrome hardware

All-black turntable coffin from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone series cases, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. Odyssey's Flight Zone Battle Mode Case holds and protects an entire setup including 2 turntables battle style (sideways) and a mixer. The case features fully padded turntable wells, center mixer slot with slide out front panel, detachable lid, and recessed handles and latches. The case also features wheels for easy transportation and is ATA approved. Fits 1200 styles tables and most mixers.

Can accommodate Technics as well as Numark Turntables.

KEY FEATURES

• sleek all-black finish
• fits two 1200 style turntables and most mixers
• battle style configuration (turntables sideways)
• padded turntable wells
• center mixer slot with slide-out panel
• detachable lid
• recessed handles
• recessed latches
• includes wheels for easy transport

10" MIXER MODEL FZBM10WBL

• fits most 10" mixers

12" MIXER MODEL FZBM12WBL

• fits most 12" mixers.

LAB POINTS

• custom hard case for Traktor S4
• sliding platform for laptop
• storage pit for cables and accessories
• all black finish

MANUFACTURER'S REVIEW

The Odyssey Flight Zone FZGSTKS4BL case is specially made for the Traktor Kontrol S4 DJ midi digital controller and can also fit the American Audio VMS4 DJ controller as well. It features our patented Glide Style laptop platform that slides forward and backwards over the control unit to whatever position best suits you. Also features a lower storage/ventilation pit that has enough room for cables and other compact DJ essentials. This is the Black Label version and comes in a sleek all black finish.

Also fits:

• Numark IDJ3
• ADJ VMS4

Note: Please do not transport your laptop in this case as damage may occur. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point.

KEY FEATURES

• all black finish
• Patented Gliding Laptop Platform
• VMS4 Width Adjustment Foam
• Removable Front Angled V-Cut Access Panel
• Heavy-Duty Ball Corners
• Recessed Handle and Latches
• Plenty of Cable Management Underneath & Behind the Controller
• Controller Compartment is: 19-5/8"W x 12-5/8"D
• Approximate Dimensions (exterior): 24.5"W x 8.75"H x 18.25"D
• Weight: 23 lbs.

LAB POINTS

• full dj coffin with sliding platform for production gear
• holds 2 turntables and 10" mixer
• holds laptop + MIDI controllers like APC20, Launchpad, iPad, etc
• built-in wheels for easy transport

MANUFACTURER'S REVIEW

As the evolution of the DJ continues, so does the designs of Odyssey DJ coffins. Introducing the new REMIXER GLIDE STYLE SERIES DJ coffins featuring a full width glide platform to place all your DJ remix gear. With digital vinyl software such as Serato, Traktor Scratch, and Ableton, more DJs have gone through the transition from beat mixer turntablist to full on remixer producer. Availability of so many affordable remixing tools to the DJ, such as midi keyboards and controllers to laptops and iPADs, have grown to an ultimate high and Odyssey is there in the middle of it all providing these DJs the most functional DJ coffins yet with the REMIXER GLIDE STYLE SERIES.

Our Glide Style Coffins features our patented Laptop platforms that glide forward and backward over the mixer and turntables. Other features include rugged built-in wheels, heavy-duty spring loaded latches, stacking ball corners, and removable front access panels. Cabling is clean and easy through convenient access ports throughout the coffin. Accommodate Technics as well as Numark and Stanton turntables.

For more details, please visit the manufacturer's website.

KEY FEATURES

• All black finish
• Patented Full Width Glide Platform
• Heavy-Duty Ball Corners
• Built-in Corner Roller Wheels For Easy Transport
• Removable Front Mixer V-Cut Panel
• Rear and Bottom Cable Ports
• Recessed Handle and Latches
• Mixer and Turntable Ventilation Pits
• Limited Lifetime Warranty

10" MIXER MODEL FZGSPBM10WBL

• fits most 10" mixers
• Turntable wells hold turntables with width of 15", depth up to 18"
• Mixer well holds mixers with a width from 8.75" to 10.25", depth up to 14" and 3.25" tall
• Mixer Width Adjustment Foam Strips Included
• Approximate Dimensions (exterior): 47.25"W x 10.5"H x 24.25"D
• Approximate Weight: 56 lbs

12" MIXER MODEL FZGSPBM12WBL

• fits most 12" mixers
• Turntable wells hold turntables with width of 15", depth up to 18"
• Mixer well holds mixers with a width of up to 12.50", depth up to 21.5" and 3.25" tall
• Mixer Width Adjustment Foam Strips Included
• Approximate Dimensions (exterior): 49.5"W x 10.5"H x 24.25"D
• Approximate Weight: 58 lbs

All-black turntable flight case from Odyssey. The sturdy Black label case is constructed with the same high standards as the regular ATA approved Flight Zone case, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek look. The inner compartment is lined with dense foam to keep your turntable safe and features a valley for ventilation and an area for cable management. An essential piece for DJ's that bring their own tables to gigs. Fits most turntables.

KEY FEATURES

• sleek, all-black finish
• flight ready (ATA certified)
• fits most turntables
• stackable design
• heavy duty recessed hardware
• spring loaded handle
• dimensions (exterior): 20.25"W x 9.25"H x 17.25"D
• dimensions (interior): 18"W x 3"H x 15.25"D

All-black mixer case from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone case, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. The Flight Zone Mixer case is custom built to transport your mixer in style, while offering full protection during transit. The case features foam lining to keep your mixer secure within the sturdy exterior, and also features a convenient front panel provides full protection during transit but slides out for access to front mixer controls during use. The stackable lid doubles as an elevated base for those lower tables or taller DJs (lid not shown). Recessed handles and latches and ball corners for stacking.

KEY FEATURES

• front panel slides out for access to front mixer controls
• stackable lid doubles as elevated base
• foam lined

10" MIXER MODEL FZ10MIXBL

• Fits most 10" mixers
• Dimensions (interior): 10.875"(w) x 2.875"(h) x 15.25"(d)
• Fits mixers 8.75" to 10.75" wide, up to 15" deep and 3" tall

12" MIXER MODEL FZ12MIXBL

• Fits most 12" mixers
• Dimensions (exterior): 14.75"W x 8.75"H x 18.75"D
• Dimensions (interior): 12.75"W x 1.625(B)-3(F)"H x 14.75 + 3"D

This Flight Ready standard-duty ATA case from Odyssey protects your valuable turntable from the bumps and scratches of life on the road. The case is constructed of sturdy black wood laminate with dense foam lining, chrome plated hardware, recessed latches and heavy duty handle. Fits Technics 1200 and all similar sized turntables from Numark, Stanton, etc.

KEY FEATURES

• Powder Coated and Anodized Hardware
• Foam lined interior
• Heavy Duty Ball Corners
• Rear Cable Port Hole
• Recessed Handle and Latches
• Fully Foam Lined Interior
• Dimensions (exterior): 20.25"W x 9.25"H x 17.25"D
• Dimensions (interior): 18"W x 5.5"H x 15.25"D
• Weight: 16.6 lbs

Odyssey's ATA approved hard LP case protects your valuable records in transit. It features a half-split design for better viewing of your records, heavy-duty ball corners, recessed handles and latches. Fits 80 LPs/12"s.

KEY FEATURES

• half split design makes it easier to view records
• heavy duty stackable ball corners
• recessed handles and latches
• fits 80 12"s/LPs
• Dimensions (exterior): 15"W x 15"H x 15"D

Odysseys' Flite Zone Turntable Case offers heavy duty protection for your deck while in transport. This sturdy, flight ready (ATA Certified) case is constructed of fiberglass and wood laminate and features a stackable design (useful when traveling with 2 decks), recessed hardware and handle, and a thick, foam-lined interior to keep your turntable safe. An essential piece for DJ's that bring their own tables to gigs. Fits most turntables.

KEY FEATURES

• flight ready (ATA certified)
• fits most turntables
• stackable design
• heavy duty recessed hardware
• spring loaded handle

Protect your investment with this custom Glide Style case for the popular Vestax VCI300 DJ MIDI Controller. This case also features enough room under neat the player for cables and hard drives while the sliding tray holds your laptop while you DJ giving you full access to the VCI-300 controls. Features removable front cover, heavy duty ball corners, and recessed handle and latches.

Note: Please do not transport your laptop in this case damage may occur. The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point.

KEY FEATURES

• Patent pending Glide Style Tray
• Heavy Duty Ball Corners
• Removable Front Cover
• Recessed Handle and Latches
• Dimensions (exterior): 20.5"W x 8.25"H x 16.25"D

Works with the Odyssey LSTAND to hold your Serato box or other accessories. Sturdy metal construction.

Odyssey's KCC-2 Pro Cartridge case keeps mounted or Concorde style cartridges safe and secure for DJs on the go. Whether you carry Shure, Ortofon, Stanton, etc. you'll have no worries with the KCC-2's hard exterior and suspended bayonet holders that keep the carts in place and, cushioned by soft density cartridge lid egg foam. Also includes a compartment for your spare needles.

KEY FEATURES

• all black or silver coated hardware exterior
• holds Concorde & mounted style cartridges
• two suspension cartridge holders
• includes spare needles compartment
• soft low-density lid foam cushion

Odyssey's KCC-4 Pro Cartridge case keeps mounted or Concorde style cartridges safe and secure for DJs on the go. Whether you carry Shure, Ortofon, Stanton, etc. you'll have no worries with the KCC-4's hard exterior and suspended bayonet holders that keep the carts in place and, cushioned by soft density cartridge lid egg foam. Also includes a compartment for your spare needles.

• all black or silver coated hardware
• holds Concorde & mounted style cartridges
• four suspension cartridge holders
• includes spare needles compartment
• soft low-density lid foam cushion
• dimensions: 4.5" x 8.25" x 2"

LAB POINTS

• heavy duty hard case for 45s
• holds up to 120 7" records, 60 per compartment
• chrome exterior details
• foam lined interior
• rubber feet
• removable stacking lid

REVIEW

The perfect case for the 45 specialist! Odyssey's KROM 7" Record Case holds up to 120 of your precious 45s in 2 compartments that hold 60 records each. Your vinyl stash is kept safe during transport by the foam lined interior and heavy duty exterior casing. Features include chrome plated hardware, a removable lid, a fully foam-lined interior and a heavy-duty latch and spring-loaded handle. Individual K45120 cases can be stacked on each other for convenient storage.

TECH SPECS

• bottom compartment: 8" x 8" x 5"
• interior lid height: 2.5"
• exterior dimensions: 17.25" x 9.75" x 9.25"
• weight: 7 lbs.

LAB POINTS

• money saving combo pack
• portable laptop stand for digital djing + accessory tray
• works as stand-alone unit or attaches to surface or edge of case
• tray attaches to stand and holds interface, hard drive, or other accessory

OUR OPINION

If you are a digital DJ, a stand for your laptop that is easy to use and quick to setup is a necessity. The LSTAND is designed to elevate your laptop over your DJ setup, eliminating the "where do I put my laptop while I DJ" problem. In addition the height-adjustable, elevated angle gives you easier access to your laptop controls. It works as a stand-alone component as well as an extension for a dj coffin or table. Remove the two bottom supports and replace them with the included clamps, and the LStand will attach onto any surface up to 2 1/8" thick. The clamps can angled in 2 different directions, allowing you to attach it both to a flat table or the vertical side of a DJ coffin. The tray attaches to the LSTAND to hold your Serato box, interface, hard drive, or other accessories. Sturdy metal construction.

KEY FEATURES

• accommodates all laptop sizes
• height adjustable
• works as stand-alone unit or attaches to surface or edge
• sturdy metal construction

COMES WITH

• accessory tray
• clamp attachments

LAB POINTS

• portable laptop stand for digital djing
• works as stand-alone unit or attaches to surface or edge of case
• screw down adapter included

OUR OPINION

If you are a digital DJ, a stand for your laptop that is easy to use and quick to setup is a necessity. The LSTAND is designed to elevate your laptop over your DJ setup, eliminating the "where do I put my laptop while I DJ" problem. In addition the height-adjustable, elevated angle gives you easier access to your laptop controls. It works as a stand-alone component as well as an extension for a dj coffin or table. Remove the two bottom supports and replace them with the included clamps, and the LStand will attach onto any surface up to 2 1/8" thick. The clamps can angled in 2 different directions, allowing you to attach it both to a flat table or the vertical side of a DJ coffin. Sturdy metal construction.

KEY FEATURES

• accommodates all laptop sizes
• height adjustable
• works as stand-alone unit or attaches to surface or edge
• sturdy metal construction

COMES WITH

• clamp attachments

LAB POINTS

• portable laptop stand for digital djing
• simple folding design for quick, easy set up
• works as free standing unit or clamp down
• weighs only 5 lbs.

OUR OPINION

If you are a digital DJ, a stand for your laptop that is easy to use and quick to setup is a necessity. The LSTAND Mobile improves upon the best-selling LSTAND by making it even easier to setup with a simple folding function that allows the stand to be set in a snap and folded flat for easy transport. The stand is constructed of sturdy metal (yet weighs only 5lbs) and comes with stand alone legs for table top use, and clamps so it can be attached to a table or wall. Can be used to hold up laptops, Interfaces, effects units, samplers, controllers, and more. Includes storing pouch. Recommended.

KEY FEATURES

• accommodates all laptop sizes
• height adjustable
• works as stand-alone unit or attaches to surface or edge
• sturdy metal construction
• Folded Dimensions: 11"W x 3"H x 11.75"D
• Expanded Dimensions: 11"W x 12"-14.5"H x 11.75

COMES WITH

• clamp attachments
• storing pouch

LAB POINTS

• portable laptop stand for digital djing
• simple folding design for quick, easy set up
• works as free standing unit or clamp down
• weighs only 5 lbs.

OUR OPINION

If you are a digital DJ, a stand for your laptop that is easy to use and quick to setup is a necessity. The LSTAND Mobile improves upon the best-selling LSTAND by making it even easier to setup with a simple folding function that allows the stand to be set in a snap and folded flat for easy transport. The stand is constructed of sturdy metal (yet weighs only 5lbs) and comes with stand alone legs for table top use, and clamps so it can be attached to a table or wall. Can be used to hold up laptops, Interfaces, effects units, samplers, controllers, and more. Includes storing pouch. Recommended.

KEY FEATURES

• accommodates all laptop sizes
• height adjustable
• works as stand-alone unit or attaches to surface or edge
• sturdy metal construction
• Folded Dimensions: 11"W x 3"H x 11.75"D
• Expanded Dimensions: 11"W x 12"-14.5"H x 11.75

COMES WITH

• clamp attachments
• storing pouch

LAB POINTS

• affordable, basic metal stand
• portable laptop stand for digital djing
• free standing unit (no table clamping feature)

OUR OPINION

Odyssey's LSTAND-S is the super affordable stand alone only version of the best selling LSTAND. The LSTAND-S functions and works just like the LSTAND but without the table clamping feature. Use the LSTAND-S to elevate your laptop over your DJ setup, eliminating the "where do I put my laptop while I DJ" problem. In addition the height-adjustable, elevated angle gives you easier access to your laptop controls. Can also be used with CD-J's and other accessories. Sturdy metal construction and a great deal at just under 30 bucks. Recommended.

KEY FEATURES

• accommodates all laptop sizes
• height adjustable
• sturdy metal construction

LAB POINTS

• affordable, basic metal stand
• portable laptop stand for digital djing
• free standing unit (no table clamping feature)

OUR OPINION

Odyssey's LSTAND-S is the super affordable stand alone only version of the best selling LSTAND. The LSTAND-S functions and works just like the LSTAND but without the table clamping feature. Use the LSTAND-S to elevate your laptop over your DJ setup, eliminating the "where do I put my laptop while I DJ" problem. In addition the height-adjustable, elevated angle gives you easier access to your laptop controls. Can also be used with CD-J's and other accessories. Sturdy metal construction and a great deal at just under 30 bucks. Recommended.

KEY FEATURES

• accommodates all laptop sizes
• height adjustable
• sturdy metal construction

LAB POINTS

• multi-compartment backpack, holds all digital djing essentials + up to 17" laptop
• can hold popular controllers like Akai APC20/40, Vestax Typhoon, VCI-100/300, etc.
• laptop compartment for up to 17" laptops
• dedicated stand compartment
• dedicated headphone/accessory compartment
• dedicated iPad compartment
• can hold some 12" vinyl
• fully padded for protection and comfort
• large easy access front and side panels

REVIEW

Take all your digital DJ equipment essentials from one gig to the next with Odyssey's Redline Series Backpack. The bag has many padded compartments and pockets to easily store your interface, laptop, DJ controllers, stands, microphones, interfaces, cables, hard drives, headphones, vinyl, and much more. Plus, it is fully padded in all the right places for the ultimate in digital gear protection during transport. The BRLRMXBP1 sports the new Redline Remix Series sleek new black exterior design and is made with the same extra durable high-end interior construction of the Redline Elite Series bags.

Fits the following gear: Allen & Heath Xone DX, Akai APC20, Akai APC40, AkaiMPD32, Hercules 4MX, Hercules DJ4 Set, Hercules DJ Control RMX, Hercules Steel, M-Audio Torq, Native Instruments Maschine MK2, Novation Twitch, Rane TTM 56 Mixer, Rane TTM 57 Mixer, Reloop Jockey II, Reloop Mixage, Serato SL1, SL2, SL3, SL4, Serato Traktor Scratch, Vestax Typhoon, Vestax Spin, Vestax VCI-100 MK2, Vestax VCI-300 MK2 and more.

TECH SPECS

• dedicated compartments for laptop, headphones, stand, accessories, and ipad
• convenient elastic band cable holders
• padded back, handle, and shoulder straps for extra comfort
• dimensions: 16" x 19" x 10"
• weight: 4lbs.

LAB POINTS

• fits most DJ controllers (APC40/20, VCI-100/300, Typhoon, etc) and up to 17" laptop + accessories
• fully padded with interior dividers for organized packing
• dedicated compartment for laptop (adjustable)
• dedicated headphone compartment
• dedicated laptop stand compartment

MANUFACTURER'S REVIEW

Odyssey presents the Redline Series, cutting edge bags for today's on the go DJ / Remixer / Producer. The Redline Digital Backspin2 backpack lets you take all your digital essentials from one gig to the next. It has a wide variety of padded compartments and pockets to store a laptop stand (suh as LSTAND-M) as well as your laptop, digital controllers, microphones, interfaces, cables, hard drives, headphones, vinyl, and much more. Fully padded in all the right places with for the ultimate in digital gear protection. The new BRLBACKSPIN2 sports the new Redline Series DJ emblem and features large side pockets and an expanded exterior top pouch as well as a roomier interior section.

Fits gear such as: Up to 17" Big Laptop, Cables, Laptop Stand (LSTANDM), Cables, Turntable Needle Cartridge Case, Hard Drives, iPAD / iPOD, Headphones, Serato SL1,SL2,SL3,SL4, Traktor Scratch, and M-Audio Torq Interfaces, Vinyl, CDs, & Memory Sticks, Akai APC40, Akai APC20, Novation Twitch, Numark Mixtrak, Numark Mixtrak Pro, Vestax VCI-100, Vestax VCI-300/MK11, Vestax VCM-600, Vestax Typhoon, Vestax Spin, Hercules 4MX, Hercules RMX, Hercules Steel, and much more.

KEY FEATURES

• heavy-duty zippers and zipper pulls
• convenient elastic band cable holders
• easily accessible large side and front pockets
• sturdy bottom feet increases vertical stability
• padded back, handle, and shoulder straps for extra comfort
• approximate dimensions (exterior): 19" x 20" x 13"
• approximate weight: 6 lbs

LAB POINTS

• multi-compartment trolley bag for controllers, compact keyboards, tabletop CD/media players, laptops, & accessories
• fits Akai APC40/30, MPK25, Traktor S4, Pioneer DDJ-Ergo, up to 17" laptop, interfaces, stands, and more
• numerous padded pockets and pouches and reinforced frame for gear protection
• smooth rolling wheels, strong telescoping handle
• sleek red interior and black exterior
• meets carry-on requirements for most airlines
• includes padded laptop sleeve, fits up to 17"

REVIEW

Odyssey's Redline Series Control DJ Trolley Bag is designed to carry and protect all the gear on-the-go DJs and Producers need. The sleek black and red exterior houses numerous padded pockets and compartments to transport everything from DJ controllers, compact keyboards, tabletop CD/media players, and other digital devices. The main compartment features a protective padded gear bag, while the removable utility pockets allow you to configure the bag to best suit your needs. Additional compartments have enough room for all your essential accessories like laptop stands, mics, interfaces, cables, hard drives, headphones, vinyl and much more. The bag even comes with a padded laptop sleeve to safely transport your laptop (up to 17"). All this with smooth rolling wheels and strong telescoping handle for easy transport, and a size that meets most airline carry-on requirements.

fits the following gear: Akai APC40, Akai MPK 25, American Audio VMS4, Denon DN-MC6000, Native Instruments Traktor S4, Novation Nocturn 25, Novation Remote SL MKII, Novation Zero SLMKII, Numark Mixtrack Pro, M-Audio Xponent, Pioneer DDJ-ERGO, Roland TR-808, Roland TR-909, Vestax VCM-600, up to 17" Laptop, DJ Mixers, Tabletop CD/Media Players, Digital Controllers, Serato Scratch and Traktor Scratch Interfaces, Laptop Stands and more (see below for exact dimensions).

TECH SPECS

• durable nylon constuction
• heavy duty zippers and pulls
• reinforced frame
• adjustable interior foam strips
• easy access front pockets
• 3" diameter wheels
• telescoping handle
• main compartment dimensions: 22" x 3.75" x 14"/li>
• main compartment padded gear bag interior dimensions: 20.5" x 2.25" x 14"
• front exterior compartment dimensions: 7" x 11"
• external dimensions: 16" x 25-39.5" x 10"
• weight: 11 lbs.

COMES WITH

• padded laptop sleeve, fits up to 17"
• four removable utility pockets

LAB POINTS

• fits most DJ controllers (APC40/20, VCI-100/300, Typhoon, etc) and up to 17" laptop + accessories
• double extra large size fits larger DJ controllers (Pioneer DDJ-S1/T1, Numark NS6, Mixdeck, etc) and up to 2x 17" laptop + accessories
• fully padded with reinforced steel frame prevents crushing and sagging
• adjustable foam inserts for a custom fit

MANUFACTURER'S REVIEW

Odyssey presents the Redline Series, cutting edge bags for today's on the go DJ / Remixer / Producer. Each design not only makes you look good, they make you feel good. The Redline Digital bag lets you take a wide variety of your essential gear for your digital set up from one gig to the next. Within the main compartment are unique foam inserts that can be easily reconfigured or removed so you can safely store whatever your gig at the time demands such as microphones, mixers, or media players, or a digital controller such as the Vestax VCI-300 or Hercules RMX. It has enough pockets to store all your necessities and is fully padded in all the right places with a steel frame reinforcement for the ultimate in digital gear protection. The Digital bag is also great for carrying Video Game consoles and Controllers.

Large model fits gear such as: Up to 17" Big Laptop, Cables, Hard Drives, Serato Scratch, Traktor Scratch, and M-Audio Torq Interfaces, Vinyl, CDs, & Memory Sticks, DIGITAL MIDI CONTROLLERS such as: Akai APC-40, Akai APC-20, Vestax VCI-100, Vestax VCI-300, Vestax Typhoon, Vestax Spin, DJ MIXERS such as: Allen & Heath Xone:02, Xone:32, Xone:42, Xone:62, Xone:92, Pioneer DJM-700, DJM-800, Rane TTM 56, Rane TTM 57, Rane Empath, Vestax PMC-05Pro (1-4), Vestax PMC-08Pro, Vestax PMC-280, TABLETOP CD/MEDIA PLAYERS such as: Gemini CDJ600, Numark NDX800, Numark V7, Pioneer CDJ-800, CDJ-900, CDJ-1000, CDJ-2000, Stanton C-303, C-313, C-314, Technics SL-DZ1200, DJ Hero Turntable Controller, PS3, XBOX, and much more.

Extra large model fits gear such as: Akai APC-40, Akai APC-20, Vestax VCI-100, Vestax VCI-300, Vestax VCM-600, Vestax Thyphoon, Vestax Spin, Hercuales RMX/Steel, Numark IDJ3, Numark Mixtrack / Mixtrack Pro, Traktor Kontrol S4, Pioneer DDJ-ERGO, Large Format Tabletop CD/Digital Media Players and much more.

Double extra large model fits gear such as: up to 2x 17" Laptops, Cables, Hard Drives, Serato Scratch, Traktor Scratch, and M-Audio Torq Interfaces, Vinyl, CDs, & Memory Sticks, Laptop stands, DIGITAL DJ CONTROLLERS such as: Numark Mixdeck, Numark Mixdeck Express, Numark Mixdeck Quad, Numark NS6, Pioneer DDJ-S1, Pioneer DDJ-T1 and much more.

KEY FEATURES - LARGE MODEL BRLDIGITAL

• fits VCI100, VCI300, APC40
• fits most DJ controllers (and similarly sized gear) and up to 17" laptop + accessories
• fully padded with reinforced steel frame prevents crushing and sagging
• adjustable foam inserts to customize main compartment to your gear
• heavy duty zippers and zipper pulls
• convenient elastic band cable holders
• pull up handle sling
• sturdy bottom feet increases vertical stability
• padded handle and shoulder strap for extra comfort
• main compartment interior dimensions: 17.5"W x 13"H x 3.5"D
• exterior dimensions: 19"W x 15.5"H x 8"D
• weight: 6 lbs.

KEY FEATURES - EXTRA LARGE MODEL BRLDIGITALXL

• fits most DJ controllers (and similarly sized gear) and up to 17" laptop + accessories
• fully padded with reinforced steel frame prevents crushing and sagging
• adjustable foam inserts to customize main compartment to your gear
• heavy-duty zippers and zipper pulls
• convenient elastic band cable holders
• pull-up handle sling
• sturdy bottom feet increases vertical stability
• padded handle and shoulder strap for extra comfort
• main compartment interior dimensions: 21.5" x 3.5" x 14.25"
• exterior dimensions: 19"W x 15.5"H x 8"D
• weight: 8 lbs.
• includes additional padded carry bag + adjustable foam inserts (Main Compartment Dimensions.: 20" x 14" x 1.5")

KEY FEATURES - DOUBLE EXTRA LARGE MODEL BRLDIGITAL2XL

• pull-up handle rear sling (for attaching to roller bags)
• heavy-duty zippers and zipper pulls
• convenient elastic band cable holders
• large front accessory compartments with multiple pockets
• dual handle straps and shoulder strap for diverse handling
• adjustable foam inserts to customize main compartments to your gear
• main compartment interior dimensions: 28" x 13.5" x 3.5"
• laptop / accessory compartment interior dimensions : 27" x 13"
• laptop / accessory compartment can be separated into two sections with the removable foam strip divider
• Approximate Dimensions (exterior): 28"W x 14"H x 5.5"D
• Approximate Weight: 4 lbs