headphones: headphone accessories-alpha

One of the many great features of the TMA-1's design is the ability to easily swap out the ear cushions. Anyone who has heavily gigged on a pair of headphones knows how terrible it feels when the ear pads wear out. These replacement ear pads make the TMA's feel fresh as new and simply snap right in. Sold in pairs.

• Semi-Leather version feature firmer padding and higher level of isolation.
• Synthetic version has softer feel and softer padding with a lower (but still high) level of isolation.

Official replacement cable from AIAIAI, specifically made for the TMA-1.

• Coiled version is 5.2 feet long and recommended for DJing or studio applications.
• The Straight version is 3.9 feet long and lighter and recommended for everyday listening.

LAB POINTS

• works both as compact power amplifier (to power passive speakers) and a high quality headphone amp
• USB power for built in iPod charging
• simple operation
• vertical design perfect for desktops
• variable line out
• includes all necessary cables

MANUFACTURER'S REVIEW

The N22 is a compact integrated stereo power amplifier and high-quality headphone amp. Connect your iPod, computer, and speakers or headphones for a great-sounding personal stereo system. Perfectly suited for your desktop or a smaller space in your home or office, N22 is easy to connect to your Mac or PC with no software to install or settings to change. The N22 has one simple volume control with an integrated on/off switch. No other buttons or knobs to figure out!

The N22 includes a USB power port that's perfect for powering Audioengine wireless adapters to stream your music wirelessly from your computer or iPod. Pair the N22 amp with Audioengine P4 passives (or any speakers) for a high-end mini desktop hi-fi music system. Connect your iPod, computer, and speakers or headphones for a compact and great-sounding personal stereo system. You can even connect a subwoofer and charge your iPod through the USB power port. Two audio inputs are standard RCA and mini-jack connectors so you can plug in your computer, iPod or stereo directly.

Upstanding design

The vertical design of the N22 with its integrated stand allows the 22 watt/per channel stereo class A/B amplifiers to run cool through passive convection without a fan or massive heatsink. The N22 fits easily on your desk and doesn't take up much space.

Discrete headphone amplifier

For headphone enthusiasts the N22 includes a high-performance, low-noise discrete amplifier which works well with all types of headphones and earphones.

USB power

The Audioengine N22 has a built-in power port for iPod charging while listening to your music. The USB connector allows you to charge and power your iPod, iPhone, Audioengine wireless adapters or any other USB powered product. USB is for power only, not USB audio or data transfer.

Variable line out

The N22 includes a variable preamp output so you can connect a subwoofer, external amplifier, or Audioengine wireless adapter and control the volume of the line-out from the front panel.

Simple operation

Both audio inputs on the N22 are active so two audio sources may be connected to the amplifier at the same time without the need for an input switch. A standby idle mode is also included to conserve power when you're not playing music.

KEY FEATURES

• Powerful but compact stereo audio amplifier
• Cool-running 22 watts RMS per channel
• 2 inputs for iPod, iPhone, computer, TV, etc.
• High-performance headphone output
• Variable preamp output
• USB charge/power port
• Gold-plated speaker connectors
• High-quality analog volume control
• Detachable power cord
• Power-saving idle mode
• Hand-finished MDF wood cabinet
• Integrated vertical stand
• All cables included!
• compatible with Desktop computers and laptops (Mac and PC), iPods and iPhones, Headphones, Rear channel surround speakers, any products with mini-jack or RCA audio outputs

COMES WITH

• N22 amplifier with integrated stand
• N22 power supply
• Detachable AC power cord
• 1/8" audio cable, 2 meters (~6.5ft)
• RCA audio cable, 1 meter (~3.25ft)
• Speaker wire (16AWG), 1.75 meters (~5.75ft)
• Cloth amplifier bag
• Cloth power supply bag
• Cloth cable bag
• Setup Guide

LAB REVIEW

Bellari's HA 540 Class A Tube amp delivers true audiophile sound for under $300. This amp is capable of driving headphones rated at 16 - 2000Ohms and features two separate inputs (one each high and low output level source components) to guarantee lush, high quality sound connected to any audio source (CD Player, ipod, mp3 player, computer, etc.). Experience the warm, sound of tubes through your headphones with the HA 540 without breaking the bank.

KEY FEATURES

• Input Impedance: 47k ohms
• Output Impedance: 16 ohms
• Max Output Level: +15dBv @ 1kHz at .1% dist.
• THD: .05% @ 1kHz
• S/N Ratio: >80dB unweighted
• Indicator: 1 power LED
• Max Output Power: up to 500 mW/side, 1 W/stereo (@16 Ohms)
• Frequency Response: 5 Hz
• 30 kHz
• Phase Shift (In to Out): 0 dB
• Crosstalk:
• 75 dB
• Headphone Impedance: 16 Ohms
• 2000 Ohms
• Max Input Level: +15 dBV
• Input Connectors: Low: RCA, 3.5mm stereo,High: RCA
• Outputs: 1: 1/4" TRS Stereo jack, 1: 3.5 mm TRS stereo jack
• Power: 15 VDC
• 700mA
• Size: 6w x 2.5h x 5.4d in.
• Weight: 2 lb.

LAB POINTS

• high-quality 24
• bit/48kHz USB audio playback interface
• VRM (Virtual Reference Monitoring) let's you mix in different environments and through different speakers just using your headphones
• get multiple perspectives on your mix
• top notch D/A conversion for full range sound
• compact ultra-portable size, robust build quality
• Pro Tools Native and HD friendly

MANUFACTURER'S REVIEW

With VRM Box, you can mix in your studio, wherever you are. Pocket sized and built to last, VRM Box places Focusrite's proven and patent-pending VRM's Virtual Reference Monitoring technology in a robust, palm-sized audio interface.

VRM overcomes the major obstacle for mixing with headphones by giving you multiple perspectives on your mix, as if you were listening through speakers. Indeed, noise levels from mixing through speakers can make it impossible for most to mix at home, especially late at night; with VRM, you can mix any time, anywhere. Using any pair of monitoring headphones, VRM lets you choose your mixing environment from a living room, a bedroom studio, or a professional studio. You then simply choose from a list of industry-standard studio monitors and speakers.

VRM Box functions as a high-quality 24-bit/48kHz USB audio playback interface. So, whether you're mixing, creating music or simply listening to tracks, VRM Box is perfect. What's more, there's no need for a power supply or batteries, because it gets all the power it needs, with full audio quality, from your computer's USB port. VRM Box also features a digital (S/PDIF) input, which supports sample rates up to 192kHz. This allows you to run it in conjunction with your Pro Tools HD system, or any other interface with an S/PDIF output.

KEY FEATURES

• Supported Sample Rates: 44.1kHz & 48kHz
• Input channels to computer: S/PDIF (stereo)
• Output channels from computer: Headphones (stereo)
• Stereo S/PDIF input on RCA
• Headphone Output Level control (analogue)
• USB2.0 connectivity
• bus powered

Headphone Output

• Output impedance: < 10 Ohms
• Power output into 150Ohms: 15mW
• Power output into 50Ohms: 30mW
• Signal to Noise Ratio: > 105dB

S/PDIF Digital Input

• Automatic Sample Rate conversion
• Supported sample rates: continuous from 32kHz to 192kHz

Operating System Requirements

• Windows XP (service pack 3), Vista, 7 (32 and 64-bit)
• Mac OS X 10.5 Leopard (Intel only), OS X 10.6 Snow Leopard
• Dimensions: 68mm x 25mm x 68mm (W x H x D)
• Weight: 123g

LAB POINTS

• designed to drive impedance headphones ( 100 ohms o more)
• rich warm sound
• audiophile quality components
• crafted from a solid block of mahogany

MANUFACTURER'S REVIEW

High gain version of Grado's RA-1 Headphone Amp.  The RA-1HG is designed to drive headphones with impedances of 100 ohms or more, so audiophiles can enjoy the RA-1's sonic qualities with a wider selection of headphones, (though this sounds best with Grados). This amp is machined from a solid block of mahogany and measures 5" wide, 5 1/2" deep and 1 1/2" tall and weighs in at 12 oz. It is an AC version powered version that will guarantee hours upon hours of listening pleasure. And the sound? Just like all Grados: warm, smooth, full-bodied, non-fatiguing and rich. Hook it up to any line source (portable or in-home) and drive your headphones to their full potential.

Fits SR225i, SR325i, RS2i, RS1i, RS2, and RS1 models.

Fits SR60i, SR80i, SR125i,and SR60 models.

LAB POINTS

• upgrades your headphone signal from standard quality to audiophile quality
• boasts "significantly better sound" from standard headphone outputs and "rich colourful presentation, very close to reality"
• high quality metal casing offers shielding from both vibration and electromagnetic interference
• 1/4" output, power switch, volume control on front
• gold plated RCA inputs and loop outputs
• suitable for headphones with low or high impedance

LAB REVIEW

Conventional outputs found on most audio equipment and computers are not optimized for headphone usage. The Head Box S converts any audio output into a high quality headphone signal meant for "natural dynamics, transparency and pure audiophile enjoyment."

KEY FEATURES

• power output: 330mW/30 ohms, 60mW/300 ohms
• output impedance: > 30 ohms
• signal to noise ratio: 87dB (100dB - IEC -A) at full output
• gain: 11dB
• dimensions: 103 x 36 x 103 mm, 600g

COMES WITH

• power supply

Switch up your style on the fly with Sol Republic's interchangeable Soundtrack Headbands. These headbands work with all Sol Republic Tracks headphones, allowing you to add some color to express your style. Features virtually indestructible FlexTech construction built to withstand heavy abuse, comfortable cushion pad, and easy switch out design. This is the Electro blue version.

• works with all Tracks headphones
• durable FlexTech construction
• easy switch in and out design
• comfortable cushion pad

Switch up your style on the fly with Sol Republic's interchangeable Soundtrack Headbands. These headbands work with all Sol Republic Tracks headphones, allowing you to add some color to express your style. Features virtually indestructible FlexTech construction built to withstand heavy abuse, comfortable cushion pad, and easy switch out design. This is the Progressive Purple version.

• works with all Tracks headphones
• durable FlexTech construction
• easy switch in and out design
• comfortable cushion pad

LAB POINTS

• Durashock molded EVA foam
• Fits Sennheiser HD 25-1, AIAIAI TMA 1 and most DJ Headphones
• heavy duty handle
• easy grip zipper pulls

MANUFACTURER'S REVIEW

The UDG Creator Headphone Hardcase is the smart solution for the professional DJ that knows they need to protect their Headphones. It has been tastefully designed with a D-shape profile to compliment the folded form of the DJ Headphones. Constructed from Durashock EVA with a laminated polyester exterior, the case provides protection against drops, scratches & liquids. An injection molded zipper and heavy duty non-slip carry handle ensure that the case is robust yet comfortable for the frequent traveling DJ.

KEY FEATURES

• Durashock molded EVA foam
• fits Sennheiser HD 25-1, AIAIAI TMA 1 and most DJ Headphones
• Outer Dimensions: 8.70" x 10.40" x 3.50"
• Inner Dimensions: 8.10" x 8.10"x 3.30"
• Weight: 0.6 lbs

LAB POINTS

• Durashock molded EVA foam
• Fits Sennheiser HD 25-1, AIAIAI TMA 1 and most DJ Headphones
• heavy duty handle
• easy grip zipper pulls

MANUFACTURER'S REVIEW

The UDG Creator Headphone Hardcase is the smart solution for the professional DJ that knows they need to protect their Headphones. It has been tastefully designed with a D-shape profile to compliment the folded form of the DJ Headphones. Constructed from Durashock EVA with a laminated polyester exterior, the case provides protection against drops, scratches & liquids. An injection molded zipper and heavy duty non-slip carry handle ensure that the case is robust yet comfortable for the frequent traveling DJ.

KEY FEATURES

• Durashock molded EVA foam
• fits Sennheiser HD 25-1, AIAIAI TMA 1 and most DJ Headphones
• Outer Dimensions: 8.70" x 10.40" x 3.50"
• Inner Dimensions: 8.10" x 8.10"x 3.30"
• Weight: 0.6 lbs

LAB POINTS

• heavy case fits most foldable headphones
• adjustable and detachable shoulder strap
• can be attached to UDG bags via integrated buckle system

MANUFACTURER'S REVIEW

The UDG Headphone Bag is a compact bag that holds most foldable DJ headphones. The bag comes with a special adjustable and detachable shoulder strap, and can also be attached to other UDG bags using our integrated buckle locking system.

The Headphone Bag can be combined with the following bags: Courier Bag Deluxe, Starter Bag, Sling Bag, Sling Bag Trolley, and the Sling Bag Trolley Deluxe.

KEY FEATURES

• Fabric: Water resistant nylon 840 D
• Electroplated zippers
• Holds most foldable DJ headphones
• Detachable and adjustable shoulder strap
• Can be combined via the Integrated buckle locking system
• Outer Dimensions: 7.48" x 7.48" x 3.54"

Replacement earpads for Technics RP-DH1200 headphones made from velour or leather material. Get a fresh feel on your ears while getting more life out of your headphones. The velour earpads also react better in hot club conditions, absorbing sweat and keeping your ears more comfortable than standard earpads do. NOTE: These are not official Technics product, but are custom made to fit RP-DH1200 model headphones specifically.

• leather or velour construction
• extends the life of your headphones
• custom fits Technics RP-DH1200

Replacement earpads for Technics RP-DJ1200/1210 headphones made from velour or leather material. Get a fresh feel on your ears while getting more life out of your headphones. The velour earpads also react better in hot club conditions, absorbing sweat and keeping your ears more comfortable than standard earpads do. NOTE: These are not official Technics product, but are custom made to fit RP-DJ1200 model headphones specifically.

• leather or velour construction
• extends the life of your headphones
• custom fits Technics RP-DH1200