hard cases-alpha

Keep your Kontrol X1 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the Kontrol X1 through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner.

KEY FEATURES

• fits Native Instruments Kontrol X1 only

Keep your Maschine clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the Maschine controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK. Recommended.

KEY FEATURES

• fits Native Instruments Maschine only

Keep your S4 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the S4 through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner. Recommended.

KEY FEATURES

• fits Native Instruments S4 only

Keep your CDJ-2000 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner.

Keep your CDJ-900 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the CDJ-900 through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner.

Keep your DDJ-S1 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner.

Keep your Pionner DDJ-T1 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the DDJ-T1 controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner. Recommended.

KEY FEATURES

• fits Pioneer DDJ-T1 only

Keep your mixer clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner. Fits Pioneer DJM-500/600/700/800 and Allen & Heath Xone 62/92.

Keep your DJM-900 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner.

Keep your mixer clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner. Fits Rane TTM-56 and TTM-57SL.

Keep your 1200 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the table through the polycarbonate material (way better than acrylic which is prone to cracking). The use of polycarbonate also means that thinner material can be used, making for discrete, strong yet attractive protection for your Technics. Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner. Recommended.

KEY FEATURES

• custom fits Technics 1200/1210
• constructed of polycarbonate
• smoke tint

Keep your VCI-100MKII clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the VCI-100MKII controls through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner.

KEY FEATURES

• fits Vestax VCI-100MKII only

Keep your VCI-300 clean and dust free with Decksaver's high quality custom dust cover. These dust covers fit securely over the unit and feature a slick smoked/clear tint so you can still see the VCI-300 through the polycarbonate material (way better than acrylic which is prone to cracking). Protect your investment and reduce the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, good for the bedroom DJ or the club owner. Fits both MKI & MKII versions.

High quality hard case from Marathon for your 10" mixer and laptop. Features slide out front panel & laptop shelf, ATA 300 design with front access panel, heavy duty 9mm laminated plywood construction, industrial strength latches, spring action handles, dual anchor rivets, and easy locking fit and tongue. Also includes mounting hardware and modular foam lining for the perfect fit. Fits Large format 10" size mixers such as Rane TTM-56, TTM57SL, Pioneer DJM-400, DJM-909, Numark, DXM-06, DXM-09, DXM-PRO, and all other 10" brands like Gemini, Vestax. Perfect for digital DJs (interface can be placed in back of mixer).

• patent pending design laptop shelf
• fits any 10" Mixer Case
• ATA 300 Style
• 9mm laminated plywood
• spring action handles
• easy locking fit and tongue
• stackable powerful ball corners
• industrial strength latches and rubber feet
• dual anchor rivets
• includes mounting hardware
• exterior Dimensions (closed lid): 21.5" D x 17" W x 10" H
• dimensions of laptop top shelf: 16" W x 14"
• weight: 24 lbs

LAB POINTS

• heavy duty case custom made for Kontrol S4 by Native Instruments
• detachable front panel for adjusting controls on the front of the S4
• can be used as a laptop stand
• elevates your S4 unit to industry-standard DJ hardware height
• durable wood + aluminum casing w/ felt inner padding
• Traktor logo on front

MANUFACTURER'S REVIEW

This robust and reliable case is designed especially for TRAKTOR KONTROL S4. Soft padding on the inside, extremely durable on the outside, perfect for any mobile DJ. Special feature: This case can easily be turned into a rock-solid laptop stand as well as elevating the S4 unit to the level of industry-standard DJ hardware - a compact solution that fits into any DJ booth.

KEY FEATURES

• custom fits and protects Traktor Kontrol S4
• elevates your S4 unit to industry-standard DJ hardware height
• material: Wood with aluminum casing and inner felt padding
• bottom: rubber feet for sturdy positioning
• white TRAKTOR logo print on front
• outer dimensions: 23.6" x 18" x 8.3"
• weight: 19 lbs

Odyssey's ATA Flite-Ready case features two individual compartments that hold a total of 120 7" records. Chrome plated hardware and a removable foam padded lid gives your 45s the protection they deserve.

KEY FEATURES

• Dimensions (exterior): 20"W x 11"H x 11"D
• 2 rows
• holds 120 7"s
• removable foam padded lid
• chrome hardware

Odyssey once again introduces a product you can use at every gig. The DJ Chair from Odyssey allows you to sit back at a comfortable height while reducing fatigue and stress on your back and legs during those long gigs. The 5 adjustment levels, from 19" to 33", make you look cool without the appearance of sitting back on the job.

KEY FEATURES

• Comfortable portable seating
• Relieves back and leg stress
• Height adjustable from 19" to 33"
• Padded removable top

Sleek Truss Table from Odyssey adds a professional studio look to any room with its unique diamond pattern textured top. Constructed of high-grade aluminum, this is a sturdy table for dj setups at clubs, restaurants or home studios.

KEY FEATURES

• constructed of high grade aluminum
• diamond pattern texture top
• Dimensions (exterior): 59.24"W x 31.5"H x 20"D
• Weight: 43 lbs

The ATT2 upgrades Odyssey's ATT Truss Table by adding fold-flat portability, and swiveling side platforms. Each of the 3 tabletops measure: 18.5" x 19.5" and make for a stylish and versatile table for your equipment whether in the club, restaurant or home studio.

KEY FEATURES

• high grade aluminum construction
• swiveling table side platforms
• foldable for portability
• dimensions (exterior): 60"W x 35.25"H x 19.25"D

Odyssey's ATA Battle Mode Console features 90 degree turntable wells (sideways - aka battle mode). This case features fully padded turntable wells and recessed hardware. Holds two 1200 style turntables in Battle position, and one mixer. Includes wheels for easy transport.

Can accommodate Technics as well as Numark Turntables.

KEY FEATURES

• Battle mode console
• Padded turntable wells
• Center mixer with slide-out panel
• Detachable lid
• Recessed handles
• Recessed latches
• Includes wheels for easy transport

10" MIXER MODEL FZBM10W

• fits most 10" mixers
• Dimensions FZBM10W (exterior): 47"W x 9"H x 22.5"

12" MIXER MODEL FZBM12W

• fits most 12" mixers
• Dimensions FZBM12W (exterior): 48"W x 9"H x 22.5"

All-black turntable coffin from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone series cases, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. Odyssey's Flight Zone Battle Mode Case holds and protects an entire setup including 2 turntables battle style (sideways) and a mixer. The case features fully padded turntable wells, center mixer slot with slide out front panel, detachable lid, and recessed handles and latches. The case also features wheels for easy transportation and is ATA approved. Fits 1200 styles tables and most mixers.

Can accommodate Technics as well as Numark Turntables.

KEY FEATURES

• sleek all-black finish
• fits two 1200 style turntables and most mixers
• battle style configuration (turntables sideways)
• padded turntable wells
• center mixer slot with slide-out panel
• detachable lid
• recessed handles
• recessed latches
• includes wheels for easy transport

10" MIXER MODEL FZBM10WBL

• fits most 10" mixers

12" MIXER MODEL FZBM12WBL

• fits most 12" mixers.

LAB POINTS

• custom fits Numark NS6
• sliding laptop platform
• heavy duty construction
• high-density bevel foam interior neatly angles upward raising the controller to a comfortable level
• removable v-cut front access panel
• all black anodized and powder coated hardware

MANUFACTURER'S REVIEW

Odyssey presents the Flight Zone FZGSNS6 case featuring our revolutionary patented Glide Style laptop platform design. Specifically made for the highly anticipated Numark NS6 Serato Itch DJ controller, it also features our exclusive, patent pending, high-density bevel foam interior that neatly angles upward raising the controller for an efficient control surface. The stylish V-Cut removable panel allows for easy access to the front controls and headphone/mic jacks. A spacious ventilation pit under the controller is ideal for storing cables and other accessories. This is the sleek, all black model.

KEY FEATURES

• all black finish
• gliding laptop platform
• removable V-cut front access panel
• bevel foam interior
• heavy-duty ball corners
• recessed handle and latches
• plenty of cable management underneath & behind the controller
• Approximate Dimensions (exterior): 28"W x 9"H x 19"D
• Weight: 33lbs

LAB POINTS

• custom fits RANE Sixty-Eight mixer
• gliding laptop platform slides over mixer
• removable front access panel
• heavy duty construction
• sleek all black finish

MANUFACTURER'S REVIEW

Specifically made for the RANE 68 DJ mixer, Odyssey's Flight Zone Glide Style FZGSRANE68BL case is built with our patented gliding laptop platform that conveniently slides forward or backward over the mixer to the desired positioned. The RANE 68 sits perfectly safe inside the case with plenty of rear space essential for multiple player and laptop connectivity, and the bottom storage pit helps keep the mixer well ventilated as the dance floor heats up. This is the Black Label version that features all Black Anodized and Powder Coated Hardware.

KEY FEATURES

• all black anodized and powder coated hardware
• patented gliding laptop platform
• removable front access V-Cut panel
• recessed handles and latches
• heavy duty ball corners
• bottom interior storage / ventilation mixer pit
• limited lifetime warranty
• dimensions (exterior): 21"W x 9"H x 17.25"D
• weight: 23 lbs

Odyssey's Black Label Folding DJ stand supports your DJ coffin at the perfect height for mixing and performing. Folds up for easy transport and expands to 33.25"w x 36.5"h x 19.25"d. Now in all black finish.

KEY FEATURES

• Dimensions
• Expanded: 33.25"w x 36.5"h x 19.25"d
• Folded: 33.25"w x 36.5"h x 3.625"d

Coffin not included.

Now in sleek all black finish. Odyssey's Glide Style turntable console is made to house 2 turntables in "battle mode", a mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.

KEY FEATURES

• holds 1 mixer and 2 turntables in battle-mode
• gliding platform for your laptop with hidden Serato compartment
• stackable ball corners
• removable lid
• durable Flite-Ready design
• includes wheels

10" MIXER MODEL FZGSBM10WBL

• fits most 10" mixers
• Mixer Well is 10.125"W x 17.50"D
• TT Well is 18"D x 14"W
• Laptop trays is: 18.5"W x 12"D
• Serato Tray is: 12"W x 12"D
• Dimensions (exterior): 45.5"W x 12.5"H x 23.75"D

12" MIXER MODEL FZGSBM12WBL

• fits most 12" mixers
• Mixer Well is 12.125"W x 17.50"D
• TT Well is 18"D x 14"W
• Laptop trays is: 18.5"W x 12"D
• Serato Tray is: 12"W x 12"D
• Dimensions (exterior): 47.75"W x 12.5"H x 23.5"D

LAB POINTS

• custom hard case for Traktor S4
• sliding platform for laptop
• storage pit for cables and accessories
• all black finish

MANUFACTURER'S REVIEW

The Odyssey Flight Zone FZGSTKS4BL case is specially made for the Traktor Kontrol S4 DJ midi digital controller and can also fit the American Audio VMS4 DJ controller as well. It features our patented Glide Style laptop platform that slides forward and backwards over the control unit to whatever position best suits you. Also features a lower storage/ventilation pit that has enough room for cables and other compact DJ essentials. This is the Black Label version and comes in a sleek all black finish.

Also fits:

• Numark IDJ3
• ADJ VMS4

Note: Please do not transport your laptop in this case as damage may occur. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point.

KEY FEATURES

• all black finish
• Patented Gliding Laptop Platform
• VMS4 Width Adjustment Foam
• Removable Front Angled V-Cut Access Panel
• Heavy-Duty Ball Corners
• Recessed Handle and Latches
• Plenty of Cable Management Underneath & Behind the Controller
• Controller Compartment is: 19-5/8"W x 12-5/8"D
• Approximate Dimensions (exterior): 24.5"W x 8.75"H x 18.25"D
• Weight: 23 lbs.

Protect your investment with this custom Glide Style case for the popular Vestax VCI300 DJ MIDI Controller with integrated slide out keyboard tray now in sleek, all black finish. This case also features enough room underneath the player for cables and hard drives while the sliding tray holds your laptop giving you full access to the VCI-300 controls. Features removable front cover, heavy duty ball corners, and recessed handle and latches. Also fits M-Audio Xponent.

Note: Please do not transport your laptop in this case damage may occur. The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point.

KEY FEATURES

• Powder Coated and Anodized Hardware
• Patent pending Glide Style Tray
• Pullout keyboard tray
• Heavy Duty Ball Corners
• Removable Front Cover
• Recessed Handle and Latches
• Rear Cable port perfect for cable management
• Cable and Hard Drive Pits
• Laptop Tray is 17.75"W x 12"D
• Dimensions (exterior): 20"W x 8.5"H x 16.5"D

Now in sleek all black finish. Odyssey's Glide Style turntable console is made to house 2 large format CD players, a mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.

KEY FEATURES

• holds 1 mixer and 2 large format CD Players
• gliding platform for your laptop with hidden Serato compartment
• stackable ball corners
• removable lid
• durable Flite-Ready design
• includes wheels

10" Mixer Model FZGS10CDJWBL

• fits most 10" mixers
• Mixer Well is: 10.125"W x 17.50"D
• TT Well is: 18"D x 14"W
• Laptop trays is: 18.5"W x 12"D
• Serato Tray is: 12"W x 12"D
• Dimensions (exterior): 45.5"W x 12.5"H x 23.75"D

12" Mixer Model FZGS12CDJWBL

• fits most 12" mixers
• Mixer Well of FZGS12CDJWBL is: 12.125"W x 17.50"D
• TT Well is: 18"D x 14"W
• Laptop trays is: 18.5"W x 12"D
• Serato Tray is: 12"W x 12"D
• Dimensions (exterior): 47.75"W x 12.5"H x 23.5"D

Odyssey's Black Label Series of ATA flight cases are made to the exact same standards as their Flight Zone series but with a twist. Each compartment features a valley that allows for more ventilation of the gear as well as an area for cables management.The components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in "Black" for a slick look. The glide style feature allows you to place your laptop and interface above your mixer on sliding platforms for easy access. Holds 10" mixers.

KEY FEATURES

• Glide style compartment for mixer and interface
• Heavy Duty Ball Corners
• Recessed Handle and Latches
• Limited Lifetime Warranty

10" MIXER MODEL FZGS10MIXBL

• fits most 10" mixers
• Laptop platform dimension: 20.25"W x 12.25"D
• Bottom platform is: 10.25"W x 12.25"D
• Mixer Compartment is: 10.75"W x 15.5"D (plus 3" for plug-ins)

12" MIXER MODEL FZGS12MIXBL

• fits most 12" mixers
• Laptop platform dimension: 20.25"W x 12.25"D
• Bottom platform is: 12.25"W x 12.25"D
• Mixer Compartment is: 12.625"W x 15"D (plus 3" for plug-ins)

LAB POINTS

• custom fits Pioneer DDJ-S1 and DDJ-T1
• sliding laptop platform
• heavy duty construction
• high-density bevel foam interior neatly angles upward raising the controller to a comfortable level
• removable v-cut front access panel
• all black anodized and powder coated hardware

MANUFACTURER'S REVIEW

Odyssey presents the Flight Zone slim case featuring our revolutionary patented Glide Style laptop platform design. Specifically made for the long awaited Pioneer DDJ-S1 and Pioneer DDJ-T1 DJ controllers, it also features our exclusive, patent pending, high-density bevel foam interior that neatly angles upward raising the controller for an efficient control surface. The stylish V-Cut removable panel allows for easy access to the front controls and headphone/mic jacks. A spacious ventilation pit under the controller is ideal for storing cables and other accessories. This is the sleek, all black finish version.

KEY FEATURES

• all black finish
• gliding laptop platform
• glide tray is 29" x 12"
• removable V-cut front access panel
• bevel foam interior
• heavy-duty ball corners
• recessed handle and latches
• plenty of cable management underneath & behind the controller
• controller compartment is: 26.75" x 12"
• approximate Dimensions (exterior): 31.75"W x 8.5"H x 18.75"D
• weight: 30lbs

Odyssey Introduces the GSX Glide Style Series for large format CD player DJ Consoles. The GSX Glide Style features the ability to safely store your laptop inside the actual laptop platform that sits right above the mixer compartment. To access the compartment, the top section slides open left and right and includes key locks for security allowing the DJ to take a break from the booth without having to worry about theft. Features all black finish, heavy duty ball corners, rear cable port, ventilation pits, and more. Holds CD players such as Amercan Audio Radius 1000, American Audio Radius 2000, Denon DN-S3500, Denon DN-S3700, Denon DN-S5000, Denon DN-S5500, Gemini CDJ600, Numark V7, Pioneer CDJ-1000, Pioneer CDJ-2000, Pioneer CDJ-800, Pioneer CDJ-900, Stanton C-303, Stanton C-313, Stanton C-314, and Technics SL-DZ1200.

Note: Do not transport your laptop in this case damage may occur.

KEY FEATURES

• Patented Glide Style Sliding Laptop platform
• Lockable Laptop Compartment
• Heavy-Duty Ball Corners
• Removable front cover
• Rear Cable port
• Recessed Handle and Latches
• CD and Mixer Ventilation Pits
• Dimensions (exterior): 42.75"W x 12.25"H x 19.5"D

All black turntable CD Turntable coffin from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone series cases, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. Odyssey's Flight Zone Case holds and protects an entire setup including 2 large format CD players and a mixer. Each compartment feature a valley or pit as you might call it that allows for more ventilation of the gear as well as an area for cables management. The case features fully padded wells, 3 removable front covers, detachable lid, and recessed handles and latches. The case also includes wheels for easy transportation and is ATA approved.

KEY FEATURES

• holds a mixer and 2 large format CD Players
• Heavy Duty Ball Corners
• Recessed Handle and Latches
• 3 Removable front covers
• Includes Roller Wheels for easy transport
• 3 Cable port holes (rear and one on each mixer wall)
• CD and Mixer Ventilation Pits
• Limited Lifetime Warranty

10" Mixer Model FZ10CDJWBL

• fits most 10" mixers
• Dimensions (exterior): 41"W x 9.5"H x 20"D

12" Mixer Model FZ12CDJWBL

• fits most 12" mixers
• Dimensions (exterior): 43"W x 9.5"H x 19.125"D

Black Label Coffin for a 10" mixer and 2 medium format CD players. Made to the exact same standards as the popular ATA approved Flight Zone series but with new features: Each compartment feature a valley or pit as you might call it that allows for more ventilation of the gear as well as an area for cables management. In addition, the components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in Black for a sleek look.

KEY FEATURES

• Full foam lined interior
• Stackable ball corners
• Recessed hardware and latches
• CD and hardware ventilation pits
• CD Wells are 9.75"W x 14.25" - 17.25"D
• Mixer Well is 10.25"W x 17.25"D
• Dimensions (exterior): 31.25"W x 17.25"H x 12.5"D

LAB POINTS

• full dj coffin with sliding platform for production gear
• holds 2 turntables and 10" mixer
• holds laptop + MIDI controllers like APC20, Launchpad, iPad, etc
• built-in wheels for easy transport

MANUFACTURER'S REVIEW

As the evolution of the DJ continues, so does the designs of Odyssey DJ coffins. Introducing the new REMIXER GLIDE STYLE SERIES DJ coffins featuring a full width glide platform to place all your DJ remix gear. With digital vinyl software such as Serato, Traktor Scratch, and Ableton, more DJs have gone through the transition from beat mixer turntablist to full on remixer producer. Availability of so many affordable remixing tools to the DJ, such as midi keyboards and controllers to laptops and iPADs, have grown to an ultimate high and Odyssey is there in the middle of it all providing these DJs the most functional DJ coffins yet with the REMIXER GLIDE STYLE SERIES.

Our Glide Style Coffins features our patented Laptop platforms that glide forward and backward over the mixer and turntables. Other features include rugged built-in wheels, heavy-duty spring loaded latches, stacking ball corners, and removable front access panels. Cabling is clean and easy through convenient access ports throughout the coffin. Accommodate Technics as well as Numark and Stanton turntables.

For more details, please visit the manufacturer's website.

KEY FEATURES

• All black finish
• Patented Full Width Glide Platform
• Heavy-Duty Ball Corners
• Built-in Corner Roller Wheels For Easy Transport
• Removable Front Mixer V-Cut Panel
• Rear and Bottom Cable Ports
• Recessed Handle and Latches
• Mixer and Turntable Ventilation Pits
• Limited Lifetime Warranty

10" MIXER MODEL FZGSPBM10WBL

• fits most 10" mixers
• Turntable wells hold turntables with width of 15", depth up to 18"
• Mixer well holds mixers with a width from 8.75" to 10.25", depth up to 14" and 3.25" tall
• Mixer Width Adjustment Foam Strips Included
• Approximate Dimensions (exterior): 47.25"W x 10.5"H x 24.25"D
• Approximate Weight: 56 lbs

12" MIXER MODEL FZGSPBM12WBL

• fits most 12" mixers
• Turntable wells hold turntables with width of 15", depth up to 18"
• Mixer well holds mixers with a width of up to 12.50", depth up to 21.5" and 3.25" tall
• Mixer Width Adjustment Foam Strips Included
• Approximate Dimensions (exterior): 49.5"W x 10.5"H x 24.25"D
• Approximate Weight: 58 lbs

LAB POINTS

• full cdj coffin with sliding platform for production gear
• holds 2 large format CD turntables and 10" mixer
• holds laptop + MIDI controllers like APC20, Launchpad, iPad, etc
• built-in wheels for easy transport

MANUFACTURER'S REVIEW

As the evolution of the DJ continues, so does the designs of Odyssey DJ coffins. Introducing the new REMIXER GLIDE STYLE SERIES DJ coffins featuring a full width glide platform to place all your DJ remix gear. With digital DJ software such as Serato, Traktor Scratch, and Ableton, more DJs have gone through the transition from beat mixing and scratching to full on remixing and producing. Availability of so many affordable remixing tools to the DJ, such as midi keyboards and controllers to laptops and iPADs, have grown to an ultimate high and Odyssey is there in the middle of it all providing these DJs the most functional DJ coffins yet with the REMIXER GLIDE STYLE SERIES.

Our Glide Style Coffins features our patented Laptop platforms that glide forward and backward over the mixer and players. This model holds two large format tabletop CD/digital media players, one 10" width mixer, and enough platform space for your laptop, interface, hard drive, midi controllers and other DJ Remixer essentials. Other features include player/mixer ventilation pits that can also be used as storage compartments, rugged built-in corner roller wheels, heavy-duty spring loaded latches, stacking ball corners, and removable V-Cut front access panels. Cabling is clean and easy through convenient access ports throughout.

Large Format CD Coffin can hold:

• American Audio Radius 1000
• American Audio Radius 3000
• Denon DN-S3500
• Denon DN-S3700
• Denon DN-S5000
• Denon DN-S5500
• Gemini CDJ600
• Numark NDX800
• Numark V7
• Pioneer CDJ-800
• Pioneer CDJ-900
• Pioneer CDJ-1000
• Pioneer CDJ-2000
• Stanton C-303
• Stanton C-313
• Stanton C-314
• Technics SL-DZ1200
• and more

KEY FEATURES

• All Black Anodized and Powder Coated Hardware
• Full Width Patented Glide Platform
• Full Foam-Lined Interior
• Player/Mixer Ventilation Pits
• Built-in Corner Roller Wheels For Easy Transport
• Removable V-Cut Front Access Panels
• Stacking Ball Corners
• Rear and Bottom Cable Ports
• Heavy-Duty Recessed Hardware and Latches
• Made of 3/8" Ply
• Limited Lifetime Warranty

10" MIXER MODEL FZGSP10CDJWBL

• Fits most 10" mixers
• Mixer Well Holds Mixers With a Width From 8.75" To 10.25", Depth Up To 14" and 3.25" Tall
• Includes Adjustable Mixer/Player Width Foam Strips
• Approximate Dimensions (exterior): 42.5"W x 10.625"H x 21"D
• Approximate Weight: 50 lbs

12" MIXER MODEL FZGSP12CDJWBL

• Fits most 10" mixers
• Mixer Well Is 12.5"W x 3.25"H x x 20.5"D
• Includes Adjustable Mixer/Player Width Foam Strips
• Approximate Dimensions (exterior): 45"W x 10.625"H x 21"D
• Approximate Weight: 52 lbs

Odyssey's Black Label Series of ATA flight cases are made to the exact same standards as their Flight Zone series but with a twist. Each compartment feature a valley or pit as you might call it that allows for more ventilation of the gear as well as an area for cables management.The components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in "Black" for a slick look.

KEY FEATURES

• Heavy Duty Ball Corners
• Removable front cover
• Rear Cable port
• Recessed Handle and Latches

MEDIUM FORMAT MODEL FZCDIBL

• Dimensions (exterior): 12"W x 9.25"H x 19.25"D
• Dimensions (interior): 9.5"W x 3.625"H x 13.5-16.5"D

LARGE FORMAT MODEL FZCDJBL

• Fits CD players such as:
• Denon DN-S3500
• Denon DN-S5000
• Pioneer CDJ-800MK2
• Pioneer CDJ-1000MKII/MK3
• Stanton C-303
• Stanton C-313/C-314
• Technics SL-DZ1200
• Dimensions (exterior): 15.25"W x 8.5"H x 19.75"D
• Dimensions (interior): 12.75"W x 3.5"H x 14.5-17.5"D

LAB POINTS

• heavy duty hard case custom fits Traktor Kontrol S4, Numark IDJ3/Mixtrack/Mixtrack Pro, etc.
• all black finish
• front removable panel for easy access
• foam lined interior keeps controller safe in transit

MANUFACTURER'S REVIEW

The Odyssey Flight Zone FZTKS4 case can hold the Traktor Kontrol S4, American Audio VMS4, Numark IDJ3, or Numark Mixtrack/Mixtrack Pro DJ MIDI controllers. It features a front removable panel for easy access to the front input jacks and includes rubber feat, ball corners, and heavy-duty recessed handle and latches.

KEY FEATURES

• black anodized and powder coated hardware
• removable V-cut front access panel
• bottom rubber feet & convenient cable port
• heavy-duty ball corners
• recessed handle and latches
• controller compartment: 20" x 12.75"
• approximate dimensions (exterior): 24"W x 9"H x 18"D
• approximate weight: 20 lbs

All-black turntable flight case from Odyssey. The sturdy Black label case is constructed with the same high standards as the regular ATA approved Flight Zone case, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek look. The inner compartment is lined with dense foam to keep your turntable safe and features a valley for ventilation and an area for cable management. An essential piece for DJ's that bring their own tables to gigs. Fits most turntables.

KEY FEATURES

• sleek, all-black finish
• flight ready (ATA certified)
• fits most turntables
• stackable design
• heavy duty recessed hardware
• spring loaded handle
• dimensions (exterior): 20.25"W x 9.25"H x 17.25"D
• dimensions (interior): 18"W x 3"H x 15.25"D

All-black mixer case from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone case, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. The Flight Zone Mixer case is custom built to transport your mixer in style, while offering full protection during transit. The case features foam lining to keep your mixer secure within the sturdy exterior, and also features a convenient front panel provides full protection during transit but slides out for access to front mixer controls during use. The stackable lid doubles as an elevated base for those lower tables or taller DJs (lid not shown). Recessed handles and latches and ball corners for stacking.

KEY FEATURES

• front panel slides out for access to front mixer controls
• stackable lid doubles as elevated base
• foam lined

10" MIXER MODEL FZ10MIXBL

• Fits most 10" mixers
• Dimensions (interior): 10.875"(w) x 2.875"(h) x 15.25"(d)
• Fits mixers 8.75" to 10.75" wide, up to 15" deep and 3" tall

12" MIXER MODEL FZ12MIXBL

• Fits most 12" mixers
• Dimensions (exterior): 14.75"W x 8.75"H x 18.75"D
• Dimensions (interior): 12.75"W x 1.625(B)-3(F)"H x 14.75 + 3"D

Use this sturdy and clean looking work surface to set up your system or music. This professional table measures 60 inches wide and 20 inches deep and comes with a pre-tapped port hole for cable runs and a strap handle for easy carrying. The folding leg system is height-adjustable from 26 to 38 inches.

KEY FEATURES

• Dimensions (exterior): 60"W x 26-38"H x 20"D
• Weight: 29 lbs

Keep your vinyl safe and secure with Odyssey's carpeted LP cases. This model holds up to 180 LPs/12"s and features surface mount hardware and detachable lid.

KEY FEATURES

• holds up to 180 LPs/12"s
• carpeted
• surface mount hardware
• removable lid
• Dimensions (exterior): 28"W x 15"H x 14"D

Pro carpeted turntable case from Odyssey. This popular case used is one of the best ways to transport your turntables. Features a fully foam lined interior, recessed hardware and ball corners. Case is shown sitting atop the removable lid, which acts as a riser. Fits most 1200 style turntables.

KEY FEATURES

• foam lined interior
• recessed hardware
• ball corners
• removable lid that acts as a riser
• fits most 1200 style turntables
• dimensions (exterior): 22.5"W x 8.5"H x 17"D
• weight: 20 lbs

Protect your valuable digital recorders, samplers, drum machines, controllers and other tabletop gear with Odyssey's Pro Case. This case comes with pre-cut, diced foam - so you can custom fit most production units and digital recorders. The Digital Recorder Case feature heavy duty butterfly latches with padlock slots and removable hinged lids. Fits gear up to 22.25" wide, 15.5" deep and 6" high. Diced foam is 1.25" thick.

FITS THESE UNITS AND MORE

• AKAI MPC 2500
• AKAI MPC 1000
• AKAI DPS16STD
• BOSS BR8
• KORG D1600
• ROLAND VS 1880
• ROLAND CDX1
• ROLAND VS 890HD

KEY FEATURES

• protects your valuable production equipment
• diced foam let's you make a custom fit
• heavy duty butterfly latches with padlock slots
• removable hinged lids
• fits most digital recorders and production units
• dimensions (exterior): 24.88"W x 9.38"H x 18"D
• dimensions (interior): 22.3"W x 6"H x 15.5"D
• weight: 19 lbs

LAB POINTS

• front 7 Color-Changing LED Panel with controller (linkable to other FX cases)
• 5 LED panel Effects: (1) 1 Color or Random Color Changing, (2) Slow Flashing Color Changing, (3) Fast Flashing Color Changing, (4) Auto Color Mixing Fade in Fade out, (5) Sound Activated
• all black anodized and powder coated hardware
• built-in corner roller wheels for easy transport
• fits 2x Technics style turntables in battle mode + a mixer

MANUFACTURER'S REVIEW

The ordinary has become extraordinary with Odyssey's new Flight FX case series. Embedded into the case wall is a color changing multi-mode LED panel that runs across the front of the case. The panel can be set to any one of seven colors or can be set at a variety of color changing modes. For multiple case setups, any FX case can be synchronized to another by connecting the control boxes. Each Flight FX Series case is constructed with the same black anodized and powder coated black hardware as our Flight Zone Black Label cases complimenting the visual aura of the glowing panel. Become center stage at any gig behind these cases.

KEY FEATURES

• heavy-duty ball corners
• removable front access V-Cut panel
• rear cable panel & ports
• recessed handle and latches
• mixer & turntable ventilation pit
• mixer width foam adjustment strips

10" MIXER MODEL FFXBM10WBL

• mixer well holds mixers with a width from 8.75" to 10.25", depth up to 14" and 3.25" tall
• approximate dimensions (exterior): 46"W x 9"H x 24.625"D
• approximate weight: 46 lbs

12" MIXER MODEL FFXBM12WBL

• Fits most 12" mixers
• mixer well holds mixers with a width of up to 12.50", depth up to 21.5" and 3.25" tall
• approximate dimensions (exterior): 49"W x 9"H x 24.625"D
• approximate weight: 49 lbs

LAB POINTS

• front 7 Color-Changing LED Panel with controller (linkable to other FX cases)
• 5 LED panel Effects: (1) 1 Color or Random Color Changing, (2) Slow Flashing Color Changing, (3) Fast Flashing Color Changing, (4) Auto Color Mixing Fade in Fade out, (5) Sound Activated
• all black anodized and powder coated hardware
• built-in corner roller wheels for easy transport
• fits 2x large format tabletop CD/Digital Media Players + 12" width mixer

MANUFACTURER'S REVIEW

The ordinary has become extraordinary with Odyssey's new Flight FX case series. Embedded into the case wall is a color changing multi-mode LED panel that runs across the front of the case. The panel can be set to any one of seven colors or can be set at a variety of color changing modes. For multiple case setups, any FX case can be synchronized to another by connecting the control boxes. Each Flight FX Series case is constructed with the same black anodized and powder coated black hardware as our Flight Zone Black Label cases complimenting the visual aura of the glowing panel. Become center stage at any gig behind these cases.

Fits 12" mixer plus 2x large format CD/Media players such as: Pioneer CDJ-850, 900, 800MK2, 1000, 1000MK2, 1000MK3, 2000, DVJ-1000, Stanton C.303, 313, 314, 324, Numark V7, Numark NDX800, Denon DN-S3500, S3000, S3700, S5500, HS5500, Gemini CDJ-600, 202, 203, 210, and more (see specs below for exact dimensions).

KEY FEATURES

• heavy-duty ball corners
• removable front access V-Cut panel
• rear cable panel & ports
• recessed handle and latches
• mixer & player ventilation pit
• mixer well is 12.5"W x 3.25"H x x 20.5"D
• approximate dimensions (exterior): 43.75"W x 9"H x 21.625"D
• approximate weight: 46 lbs
• mixer & player width foam adjustment strips

LAB POINTS

• front 7 Color-Changing LED Panel with controller (linkable to other FX cases)
• 5 LED panel Effects: (1) 1 Color or Random Color Changing, (2) Slow Flashing Color Changing, (3) Fast Flashing Color Changing, (4) Auto Color Mixing Fade in Fade out, (5) Sound Activated
• all black anodized and powder coated hardware
• built-in corner roller wheels for easy transport
• fits 2x large format tabletop CD/Digital Media Players + a width mixer

MANUFACTURER'S REVIEW

The ordinary has become extraordinary with Odyssey's new Flight FX case series. Embedded into the case wall is a color changing multi-mode LED panel that runs across the front of the case. The panel can be set to any one of seven colors or can be set at a variety of color changing modes. For multiple case setups, any FX case can be synchronized to another by connecting the control boxes. Each Flight FX Series case is constructed with the same black anodized and powder coated black hardware as our Flight Zone Black Label cases complimenting the visual aura of the glowing panel. Become center stage at any gig behind these cases.

Fits a mixer plus 2x large format CD/Media players such as: Pioneer CDJ-850, 900, 800MK2, 1000, 1000MK2, 1000MK3, 2000, DVJ-1000, Stanton C.303, 313, 314, 324, Numark V7, Numark NDX800, Denon DN-S3500, S3000, S3700, S5500, HS5500, Gemini CDJ-600, 202, 203, 210, and more (see specs below for exact dimensions).

KEY FEATURES

• heavy-duty ball corners
• removable front access V-Cut panel
• rear cable panel & ports
• recessed handle and latches
• mixer & player ventilation pit
• mixer & player width foam adjustment strips

10" MIXER MODEL FFX10CDJWBL

• Fits most 10" mixers
• mixer well holds mixers with a width from 8.75" to 10.25", depth up to 14" and 3.25" tall
• approximate dimensions (exterior): 42"W x 9"H x 21.625"D
• approximate weight: 42 lbs

12" MIXER MODEL FFX12CDJWBL

• Fits most 12" mixers
• mixer well is 12.5"W x 3.25"H x x 20.5"D
• approximate dimensions (exterior): 43.75"W x 9"H x 21.625"D
• approximate weight: 46 lbs

LAB POINTS

• front 7 Color-Changing LED Panel with controller (linkable to other FX cases)
• 5 LED panel Effects: (1) 1 Color or Random Color Changing, (2) Slow Flashing Color Changing, (3) Fast Flashing Color Changing, (4) Auto Color Mixing Fade in Fade out, (5) Sound Activated
• all black anodized and powder coated hardware
• built-in corner roller wheels for easy transport
• fits most large format CD Players (see list below)

MANUFACTURER'S REVIEW

The ordinary has become extraordinary with Odyssey's new Flight FX case series. Embedded into the case wall is a color changing multi-mode LED panel that runs across the front of the case. The panel can be set to any one of seven colors or can be set at a variety of color changing modes. For multiple case setups, any FX case can be synchronized to another by connecting the control boxes. Each Flight FX Series case is constructed with the same black anodized and powder coated black hardware as our Flight Zone Black Label cases complimenting the visual aura of the glowing panel. Become center stage at any gig behind these cases.

Fits large format CD/Media players such as: Pioneer CDJ-850, 900, 800MK2, 1000, 1000MK2, 1000MK3, 2000, DVJ-1000, Stanton C.303, 313, 314, 324, Numark V7, Numark NDX800, Denon DN-S3500, S3000, S3700, S5500, HS5500, Gemini CDJ-600, 202, 203, 210, and more (see specs below for exact dimensions).

KEY FEATURES

• heavy-duty ball corners
• removable front access V-Cut panel
• rear cable panel & ports
• recessed handle and latches
• player ventilation pit
• approximate dimensions (exterior): 21.5"W x 8.5"H x 15.25"D
• approximate weight: 18 lbs
• CD player width foam adjustment strips

LAB POINTS

• front 7 Color-Changing LED Panel with controller (linkable to other FX cases)
• 5 LED panel Effects: (1) 1 Color or Random Color Changing, (2) Slow Flashing Color Changing, (3) Fast Flashing Color Changing, (4) Auto Color Mixing Fade in Fade out, (5) Sound Activated
• all black anodized and powder coated hardware
• built-in corner roller wheels for easy transport
• fits most 1200 style turntables

MANUFACTURER'S REVIEW

The ordinary has become extraordinary with Odyssey's new Flight FX case series. Embedded into the case wall is a color changing multi-mode LED panel that runs across the front of the case. The panel can be set to any one of seven colors or can be set at a variety of color changing modes. For multiple case setups, any FX case can be synchronized to another by connecting the control boxes. Each Flight FX Series case is constructed with the same black anodized and powder coated black hardware as our Flight Zone Black Label cases complimenting the visual aura of the glowing panel. Become center stage at any gig behind these cases. Fits most 1200 style turntables from Technics, Numark and Stanton.

KEY FEATURES

• heavy-duty ball corners
• removable front access V-Cut panel
• rear cable panel & ports
• recessed handle and latches
• player ventilation pit
• approximate dimensions (exterior): 17.75"W x 9"H x 21"D
• approximate weight: 18 lbs