Audioengine Speakers

Additional receiver unit for use with the Audioengine W3 wireless transmitter system. This unit receives its signal from the W3 (sold separately) and can be used to transmit music up to 100 feet. Power for the Receiver is provided from either a USB computer port, from the included power adapter, or from any other USB charger (such as an iPod charger, for example).

COMES WITH

• W3R receiver
• USB adapter
• 3.5mm cable
• RCA to 3.5mm cable

LAB POINTS

• send music wirelessly from any source to any system
• 16 bits/48KHz (CD quality) stereo sound
• works as a 16-bit USB Digital to Analog converter
• can broadcast to multiple receivers up to 100 feet in range
• works with analog audio sources via a 3.5mm minijack or RCA

MANUFACTURER'S REVIEW

The Audioengine W3 is designed to connect your audio components wirelessly. The W3 handles USB audio up to 16 bits/48KHz with no compression, as well as analog audio via a 3.5mm minijack. Think of the W3 as a wireless 16-bit USB DAC as well as a wireless audio link.

The W3 consists of 2 parts, the "Sender" and "Receiver". The Sender transmits audio from your computer through USB audio or from any product with 3.5mm mini-jack or RCA audio outputs. The other side of W3, the Receiver, delivers audio to any product with mini-jack or RCA audio connectors.

Power for the Sender and Receiver is provided from either a USB computer port, from the included power adapter, or from any other USB charger (such as an iPod charger, for example). Another power source is the Audioengine 5+ powered speakers, which are equipped with a USB power port on the rear panel.

TECH SPECS

• Range: 100 ft.
• Wireless Protocol: 802.11
• Frequency band: 2.4-2.4835GHz
• Latency: <20 msec
• Signal To Noise Ratio (SNR): 91dB
• Dimensions:100 x 30 x 10mm (LxWxH)

COMES WITH

• sender and receiver unit
• USB adapter
• 3.5mm cable
• RCA to 3.5mm cable

Handy USB power adapter for use with Audioengine W3, W2, D1, or charge your iPod, iPad, iPhone and most other MP3 players and products that charge via USB.

• Output: 5V 1.0A/li>
• Input: 100-240V

A simple solution for desktop speakers, the DS2 speaker wedge is a great way to get your small speakers up off your desk and at an angle right where you need them. Made to fit the Audioengine A5+ and P4, but can fit other desktop speakers (see dimensions below). Raises speakers up at a 15 degree angle.

• dimensions: 7.75"W x 2.25"H x 5"D

Additional D2R receiver unit for use with the D2 Wireless DAC. You can add up to 3 separate D2R wireless receivers to the D2 DAC and stream HD wireless music to multiple rooms at the same time. Works only with D2 DAC, does not stream music on its own.

• must be used with the D2 DAC Converter
• used for streaming HD music to multiple rooms at the same time

LAB POINTS

• stream wireless HD audio from your computer to any music system
• high performance digital-to-analog converter
• 24bit/96KHz sample rate
• USB and optical inputs
• can be used as a wireless USB-to-SPDIF converter or wireless optical PCM-to-stereo link
• includes D2 converter and receiver

MANUFACTURER'S REVIEW

Audioengine D2 Premium 24-Bit Wireless DAC allows you to stream wireless HD audio from your computer to any music system, independent of your Wi-Fi network. D2 includes USB and optical inputs, a high-performance DAC, plus the isolation benefits of wireless. Setup is fast and simple, with no software to install and without the frustration of trying to connect to your network.

The D2 offers audio fidelity and features of DACs costing several times more, but with one very important feature - it's wireless! It is a simple to use yet powerful digital-to-analog converter with performance and features generally found in much more expensive DACs. The D2 processes digital audio at any bit depth up to 24 bits and sample rates to 192KHz, then sends your music over-the-air at 24/96. It accepts USB or PCM-stereo optical and will automatically configure to match either of these inputs.

Easy setup and simple operation by bypassing your computer's sound card or headphone jack and sending wireless HD audio to any music system. D2 transmits all music file formats from any computer media player and can simultaneously transmit HD audio to up to 3 wireless receivers (comes with one, more sold separately). The 100ft (30m) typical range, low latency, built-in DAC, and resistance to interference and dropouts makes D2 the best-sounding HD wireless system available.

TECH SPECS

• DAC type: Dual Mode USB and Optical (SPDIF) wireless DAC
• Inputs: USB/Optical (SPDIF)
• Outputs: RCA Stereo/Optical (SPDIF)
• Full-scale output: 2.0V RMS (RCA)
• Output impedance: 100 ohms
• Power source: Sender: USB 5V or included external supply
• SNR: >115db
• Frequency response: 10Hz - 30KHz +/- 0.5db
• Input bit depth: up to 24 bit
• Wireless range: >100ft
• Wireless receivers supported: Up to 3 (24/96 to each receiver)

COMES WITH

• USB cable, 2ft
• Power adapter with detachable AC cord
• RCA cable, 6.5ft
• Power adapter with detachable AC cord
• Microfiber bag
• Setup Guide

LAB POINTS

• high performance digital-to-analog converter
• premium 24-bit/96kHz sound
• USB and optical inputs
• USB powered
• compact anodized aluminum casing
• plug & play, no drivers needed

MANUFACTURER'S REVIEW

Audioengine D1 Premium 24-Bit DAC (digital-to-analog converter) allows you to bypass your computer's soundcard or headphone output and send audio through USB or optical. D1 is the perfect digital interface between your computer and music system and will improve the sound of your music.

The D1 accepts inputs from both USB and optical and has outputs for any audio system or headphones. The D1 DAC is the perfect way to get great-sounding music not only from your computer but also from your TV, Apple TV, DVD/BluRay player or CD player (via optical input). And since it's powered by USB, D1 is also a high-quality portable computer headphone amplifier.

The D1 is designed with the Computer Audiophile in mind as it will process digital audio at any bit depth up to 24 bits and any sample rate to 192KHz. With it's high signal-to-noise ratio and low distortion the D1 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.

TECH SPECS

• DAC type: Dual Mode USB and Optical (SPDIF)
• Inputs: USB/Optical (SPDIF)
• Outputs: RCA stereo/3.5mm headphone
• Full-scale output: 2.0V RMS (RCA and Headphones)
• Output impedance: 47 ohms RCA, 10 ohms headphone
• Power source: USB 5V
• SNR: >110db
• Frequency response: 10Hz - 25KHz +/- 0.5db
• Input bit depth: up to 24 bit
• Dimensions: 3.5x4x1"
• Shipping Weight: 1 lbs.

COMES WITH

• USB cable, 2ft
• Microfiber bag
• Setup Guide

LAB POINTS

• powered speakers, no need for amplifier
• bestseller at our stores
  
• excellent sound, works both for DJing and regular listening
  
• USB power charge port
• custom kevlar woofers and silk tweeters
• advance tuned cabinet with rear-ported waveguide
• remote control
• RCA and mini-jack inputs, easy to play alternate sources such as MP3 player, phone
• stand-mount 1/4" threaded inserts
• magnetically shielded
• all necessary cables included

LAB REVIEW

Audioengine's A5+ Premium Powered Bookshelf Speakers offer award-winning sound for all your music, requires no amp or receiver, and are wireless-ready. These speakers offer deep, powerful bass thanks to kevlar woofers, smooth highs from silk tweeters, built-in power amplifiers, truly useful connections, and a clean industrial design. They feature custom designed and manufactured parts (woofers, tweeters, etc) hand crafted wood cabinets, and a handsome bamboo finish. Best of all, the A5's offer unique features like a built-in USB power port to power your wireless products and stream music, or keep your iPod charged. Comes with all cables, and drawstring carry bags. Recommended.

KEY FEATURES

• Powered (active) bookshelf-style speaker system
• 150W peak power total
• USB power charging
• RCA and mini-jack audio inputs
• Built-in power amplifier
• Front panel volume control
• Kevlar woofers for super low end
• Silk tweeters for smooth highs Line level outputs
• High-quality speaker connectors
• Hand-finished cabinets
• Magnetically shielded
• Works with any computer, iPod, iPhone, iPad, Airport Express, Airplay

COMES WITH

• Remote control
• Speaker wire, 12.3ft
• Detachable power cord
• Mini-jack audio cable, 6.5ft
• RCA to RCA audio cable, 6.5ft
• Cloth speaker bag
• Cloth cable bag

LAB POINTS

• powered speakers, no need for amplifier
• bestseller at our stores
  
• excellent sound, works both for DJing and regular listening
  
• USB power charge port
• custom kevlar woofers and silk tweeters
• advance tuned cabinet with rear-ported waveguide
• remote control
• RCA and mini-jack inputs, easy to play alternate sources such as MP3 player, phone
• stand-mount 1/4" threaded inserts
• magnetically shielded
• all necessary cables included

LAB REVIEW

Audioengine's A5+ Premium Powered Bookshelf Speakers offer award-winning sound for all your music, requires no amp or receiver, and are wireless-ready. These speakers offer deep, powerful bass thanks to kevlar woofers, smooth highs from silk tweeters, built-in power amplifiers, truly useful connections, and a clean industrial design. They feature custom designed and manufactured parts (woofers, tweeters, etc) hand crafted wood cabinets, and a handsome high gloss white finish. Best of all, the A5's offer unique features like a built-in USB power port to power your wireless products and stream music, or keep your iPod charged. Comes with all cables, and drawstring carry bags. Recommended.

KEY FEATURES

• Powered (active) bookshelf-style speaker system
• 150W peak power total
• USB power charging
• RCA and mini-jack audio inputs
• Built-in power amplifier
• Front panel volume control
• Kevlar woofers for super low end
• Silk tweeters for smooth highs Line level outputs
• High-quality speaker connectors
• Hand-finished cabinets
• Magnetically shielded
• Works with any computer, iPod, iPhone, iPad, Airport Express, Airplay

COMES WITH

• Remote control
• Speaker wire, 12.3ft
• Detachable power cord
• Mini-jack audio cable, 6.5ft
• RCA to RCA audio cable, 6.5ft
• Cloth speaker bag
• Cloth cable bag

LAB POINTS

• powered speakers, no need for amplifier
• bestseller at our stores
  
• excellent sound, works both for DJing and regular listening
  
• USB power charge port
• custom kevlar woofers and silk tweeters
• advance tuned cabinet with rear-ported waveguide
• remote control
• RCA and mini-jack inputs, easy to play alternate sources such as MP3 player, phone
• stand-mount 1/4" threaded inserts
• magnetically shielded
• all necessary cables included

LAB REVIEW

Audioengine's A5+ Premium Powered Bookshelf Speakers offer award-winning sound for all your music, requires no amp or receiver, and are wireless-ready. These speakers offer deep, powerful bass thanks to kevlar woofers, smooth highs from silk tweeters, built-in power amplifiers, truly useful connections, and a clean industrial design. They feature custom designed and manufactured parts (woofers, tweeters, etc) hand crafted wood cabinets, and a handsome high gloss black piano finish. Best of all, the A5's offer unique features like a built-in USB power port to power your wireless products and stream music, or keep your iPod charged. Comes with all cables, and drawstring carry bags. Recommended.

KEY FEATURES

• Powered (active) bookshelf-style speaker system
• 150W peak power total
• USB power charging
• RCA and mini-jack audio inputs
• Built-in power amplifier
• Front panel volume control
• Kevlar woofers for super low end
• Silk tweeters for smooth highs Line level outputs
• High-quality speaker connectors
• Hand-finished cabinets
• Magnetically shielded
• Works with any computer, iPod, iPhone, iPad, Airport Express, Airplay

COMES WITH

• Remote control
• Speaker wire, 12.3ft
• Detachable power cord
• Mini-jack audio cable, 6.5ft
• RCA to RCA audio cable, 6.5ft
• Cloth speaker bag
• Cloth cable bag

LAB POINTS

• works both as compact power amplifier (to power passive speakers) and a high quality headphone amp
• USB power for built in iPod charging
• simple operation
• vertical design perfect for desktops
• variable line out
• includes all necessary cables

MANUFACTURER'S REVIEW

The N22 is a compact integrated stereo power amplifier and high-quality headphone amp. Connect your iPod, computer, and speakers or headphones for a great-sounding personal stereo system. Perfectly suited for your desktop or a smaller space in your home or office, N22 is easy to connect to your Mac or PC with no software to install or settings to change. The N22 has one simple volume control with an integrated on/off switch. No other buttons or knobs to figure out!

The N22 includes a USB power port that's perfect for powering Audioengine wireless adapters to stream your music wirelessly from your computer or iPod. Pair the N22 amp with Audioengine P4 passives (or any speakers) for a high-end mini desktop hi-fi music system. Connect your iPod, computer, and speakers or headphones for a compact and great-sounding personal stereo system. You can even connect a subwoofer and charge your iPod through the USB power port. Two audio inputs are standard RCA and mini-jack connectors so you can plug in your computer, iPod or stereo directly.

Upstanding design

The vertical design of the N22 with its integrated stand allows the 22 watt/per channel stereo class A/B amplifiers to run cool through passive convection without a fan or massive heatsink. The N22 fits easily on your desk and doesn't take up much space.

Discrete headphone amplifier

For headphone enthusiasts the N22 includes a high-performance, low-noise discrete amplifier which works well with all types of headphones and earphones.

USB power

The Audioengine N22 has a built-in power port for iPod charging while listening to your music. The USB connector allows you to charge and power your iPod, iPhone, Audioengine wireless adapters or any other USB powered product. USB is for power only, not USB audio or data transfer.

Variable line out

The N22 includes a variable preamp output so you can connect a subwoofer, external amplifier, or Audioengine wireless adapter and control the volume of the line-out from the front panel.

Simple operation

Both audio inputs on the N22 are active so two audio sources may be connected to the amplifier at the same time without the need for an input switch. A standby idle mode is also included to conserve power when you're not playing music.

KEY FEATURES

• Powerful but compact stereo audio amplifier
• Cool-running 22 watts RMS per channel
• 2 inputs for iPod, iPhone, computer, TV, etc.
• High-performance headphone output
• Variable preamp output
• USB charge/power port
• Gold-plated speaker connectors
• High-quality analog volume control
• Detachable power cord
• Power-saving idle mode
• Hand-finished MDF wood cabinet
• Integrated vertical stand
• All cables included!
• compatible with Desktop computers and laptops (Mac and PC), iPods and iPhones, Headphones, Rear channel surround speakers, any products with mini-jack or RCA audio outputs

COMES WITH

• N22 amplifier with integrated stand
• N22 power supply
• Detachable AC power cord
• 1/8" audio cable, 2 meters (~6.5ft)
• RCA audio cable, 1 meter (~3.25ft)
• Speaker wire (16AWG), 1.75 meters (~5.75ft)
• Cloth amplifier bag
• Cloth power supply bag
• Cloth cable bag
• Setup Guide

• angles your desktop speakers upward and reduces vibration for better acoustics
• designed for Audioengine's A2 speakers, but fits most compact desktop speakers
• 15-degree angle

LAB POINTS

• Passive speakers, require an amp or stereo unit
• excellent sound, works both for DJing and regular listening

LAB REVIEW

The Audioengine P4 is a high-performance bookshelf speaker pair with the same great looks and sound as the A5 powered speakers. Experience the signature Audioengine sound and quality but without the built-in amplifiers. The AP4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The AP4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance. Beautiful, small, and affordable. Includes high density foam isolation pads (attached) and drawstring cloth speaker bags.

KEY FEATURES

• 4" 2-way passive, front ported design
• Hand-built and custom finished cabinets
• 5-way gold-plated binding posts
• Silk dome tweeters and Kevlar woofers
• Magnetically-shielded
• Excellent performance for music and movies
• Wall mount, stand or shelf placement

COMES WITH

• (2) AP4 Passive Speakers
• (2) Drawstring Cloth Speaker Bags
• (2) High-density foam isolation pads (attached)
• Setup Guide

LAB POINTS

• Passive speakers, require an amp or stereo unit
• excellent sound, works both for DJing and regular listening

LAB REVIEW

The Audioengine P4 is a high-performance bookshelf speaker pair with the same great looks and sound as the A5 powered speakers. Experience the signature Audioengine sound and quality but without the built-in amplifiers. The AP4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The AP4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance. Beautiful, small, and affordable. Includes high density foam isolation pads (attached) and drawstring cloth speaker bags.

KEY FEATURES

• 4" 2-way passive, front ported design
• Hand-built and custom finished cabinets
• 5-way gold-plated binding posts
• Silk dome tweeters and Kevlar woofers
• Magnetically-shielded
• Excellent performance for music and movies
• Wall mount, stand or shelf placement

COMES WITH

• (2) AP4 Passive Speakers
• (2) Drawstring Cloth Speaker Bags
• (2) High-density foam isolation pads (attached)
• Setup Guide

LAB POINTS

• Passive speakers, require an amp or stereo unit
• excellent sound, works both for DJing and regular listening

LAB REVIEW

The Audioengine P4 is a high-performance bookshelf speaker pair with the same great looks and sound as the A5 powered speakers. Experience the signature Audioengine sound and quality but without the built-in amplifiers. The AP4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The AP4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance. Beautiful, small, and affordable. Includes high density foam isolation pads (attached) and drawstring cloth speaker bags.

KEY FEATURES

• 4" 2-way passive, front ported design
• Hand-built and custom finished cabinets
• 5-way gold-plated binding posts
• Silk dome tweeters and Kevlar woofers
• Magnetically-shielded
• Excellent performance for music and movies
• Wall mount, stand or shelf placement

COMES WITH

• (2) AP4 Passive Speakers
• (2) Drawstring Cloth Speaker Bags
• (2) High-density foam isolation pads (attached)
• Setup Guide

LAB REVIEW

Audioengine S8 is the perfect bass extension for your powered speakers or as an upgrade to any music system. It features a super compact size with 8" downfiring woofer, solid hand-finished front ported cabinet, dual line inputs (RCA and mini) AND is wireless-ready. The AS8 also has a built-in AC outlet on the rear panel that's perfect for powering wireless products and features a power saving auto-sleep function. Includes all cables, and drawstring carry bags.

KEY FEATURES

• Super-compact size
• 8" custom downfiring woofer
• Wireless-ready
• Solid hand-finished, front-ported cabinet
• Auto-sleep power saving mode
• Dual line-level inputs (RCA and mini-jack)
• All cables included

COMES WITH

• AS8 Powered Subwoofer
• AC power cable
• 1/8" mini-jack audio cable, 2 meters (~6.5 feet)
• RCA audio cable, 2 meters (~6.5 feet)
• Drawstring cable bag
• Drawstring subwoofer bag
• Setup Guide

LAB REVIEW

Audioengine S8 is the perfect bass extension for your powered speakers or as an upgrade to any music system. It features a super compact size with 8" downfiring woofer, solid hand-finished front ported cabinet, dual line inputs (RCA and mini) AND is wireless-ready. The AS8 also has a built-in AC outlet on the rear panel that's perfect for powering wireless products and features a power saving auto-sleep function. Includes all cables, and drawstring carry bags.

KEY FEATURES

• Super-compact size
• 8" custom downfiring woofer
• Wireless-ready
• Solid hand-finished, front-ported cabinet
• Auto-sleep power saving mode
• Dual line-level inputs (RCA and mini-jack)
• All cables included

COMES WITH

• AS8 Powered Subwoofer
• AC power cable
• 1/8" mini-jack audio cable, 2 meters (~6.5 feet)
• RCA audio cable, 2 meters (~6.5 feet)
• Drawstring cable bag
• Drawstring subwoofer bag
• Setup Guide

LAB REVIEW

Audioengine's W2 Premium Wireless Adapter for iPod sends music wirelessly from your iPod to to any music system. AW2 provides CD quality stereo sound with no reduction in audio quality. Think of the Audioengine W2 as the "dockless dock". With a rock-solid wireless connection that beats Bluetooth, FM, and even other 2.4MHz systems, the AW2 is pre-configured out of the box so there are no buttons to push and no software to configure. Your iPod and all its controls are right there with you and you can also add other audio systems around the house and "hop" between each. The AW2 Receiver is unobtrusive and easily fits on the back of any stereo system so you can finally get rid of that clunky dock. Unwire your iPod with the this handy Wireless Adapter. Recommended.

KEY FEATURES

• Use your iPod for total wireless music control
• Quick setup, receiver included
• Super-compact size, no batteries needed
• No separate remote or base station needed
• Uncompressed CD-quality digital transmission
• No dropouts, static or interference
• Hand-built cabinets with high-gloss finish
• Wi-Fi technology beats Bluetooth and FM
• No DRM restrictions, plays all your music
• HOP feature works with up to 8 receivers
• works with iPod Classic, Touch, Nano (2nd
• 5th gen)

COMES WITH

• Wireless Music Sender for iPod
• Wireless Music Receiver
• USB AC Power Adapter
• Mini-jack to RCA Adapter Cable
• Mini-jack (3.5mm) Audio Cable
• Setup Guide

LAB POINTS

• bestseller at our stores
• active monitors, no need for an amplifier
• excellent sound, works both for DJing and regular listening
• includes all necessary cables
• Lab recommended

MANUFACTURER'S REVIEW

Audioengine's A2 powered desktop speakers intend to close the gap between computer speakers and home audio. These relatively small speakers (6" x 4" x 5.25") pack a nice punch with custom designed and manufactured parts (tweeters, woofers, and many other critical components) to ensure a theoretically flat frequency response. The A2's feature a built-in power amp (peak power total 60 Watts), 2 audio inputs (RCA, minijack), kevlar woofers for deep lows, silk tweeters for smooth highs, auto sleep function, and hand built video shielded cabinets. All cables plus drawstring carry bags included.

KEY FEATURES

• 60W peak power total
• 2 audio inputs (RCA and mini-jack)
• Built-in power amps (left speaker)
• Kevlar woofers for super low end
• Silk tweeters for smooth highs
• High-quality speaker connectors
• Auto-sleep power-saving mode
• 6"(H) x 4"(W) x 5.25"(D)
• Hand-built cabinets Video-shielded
• All cables included

COMES WITH

• Power supply
• Speaker cable (16AWG), 2 meters (~6.5 feet)
• 1/8" mini-jack audio cable, 2 meters (~6.5 feet)
• 1/8" mini-jack audio cable, 20cm (~8 inches)
• Drawstring power supply bag
• Drawstring cable bag
• Drawstring speaker bags (2)

LAB POINTS

• bestseller at our stores
• active monitors, no need for an amplifier
• excellent sound, works both for DJing and regular listening
• includes all necessary cables
• Lab recommended

MANUFACTURER'S REVIEW

Audioengine's A2 powered desktop speakers intend to close the gap between computer speakers and home audio. These relatively small speakers (6" x 4" x 5.25") pack a nice punch with custom designed and manufactured parts (tweeters, woofers, and many other critical components) to ensure a theoretically flat frequency response. The A2's feature a built-in power amp (peak power total 60 Watts), 2 audio inputs (RCA, minijack), kevlar woofers for deep lows, silk tweeters for smooth highs, auto sleep function, and hand built video shielded cabinets. All cables plus drawstring carry bags included.

KEY FEATURES

• 60W peak power total
• 2 audio inputs (RCA and mini-jack)
• Built-in power amps (left speaker)
• Kevlar woofers for super low end
• Silk tweeters for smooth highs
• High-quality speaker connectors
• Auto-sleep power-saving mode
• 6"(H) x 4"(W) x 5.25"(D)
• Hand-built cabinets Video-shielded
• All cables included

COMES WITH

• Power supply
• Speaker cable (16AWG), 2 meters (6.5 feet)
• 1/8" mini-jack audio cable, 2 meters (6.5 feet)
• 1/8" mini-jack audio cable, 20cm (8 inches)
• Drawstring power supply bag
• Drawstring cable bag
• Drawstring speaker bags (2)